Activated Silica Powder
Product: Activated Silica Powder (SiO2, Purity: 99.9%APS: 83-150nm)
Quality Control: Each lot of Activated Silica Powder was tested successfully.
|Product||Activated Silica Powder|
|Melting Point||1,713 °C (lit.)||Confirm|
|Boiling Point||2,950 °C (lit.)||Confirm|
|Solubility||Insoluble in water|
|Main Inspect Verifier||Manager QC|
Typical Chemical Analysis
|All Other Metal||<50ppm|
Dr. Marcus Tägtmeyer (International Medical and Technological University, Dar es Salaam, Tanzania)
Metal powder can be referred to as as finely divided solid, smaller than 1000 µm in its maximum dimension. Particles are defined as the smallest unit of a powder. The particles of most of the metal powders exist in the sizes of 25 – 200µm.
Dr. Ms Jane Li (National Penghu University of Science and Technology, Magong, Penghu, Republic of China)
A metal powder can be easily shaped, with the desirable properties of a solid after processing. Metal powders are used in variety of applications. Their use in powder metallurgy results in a variety of products, including dental restorations, oil-less bearings, automotive transmission gears, armor piercing projectiles, electrical contacts, nuclear power fuel elements, orthopedic implants, business machine parts, high-temperature filters, aircraft brake pads, etc. Metal powders have also found uses in products, such as paint pigments, rocket fuels, explosives, catalysts, printing inks, and many others.
Dr. Willem-Jan de Kleijn Ph.D (Luleå University of Technology, Luleå, Sweden)
Metal powders are a comparatively small activity when compared to common powders such as cereal and sand. The most widely used metal powders are iron and steel, which are followed by aluminum, copper, nickel, tungsten, etc
Dr. JKF Gojukai PhD (Kaiserslautern University of Technology, Kaiserslautern, Rhineland-Palatinate, Germany)
The main characteristics of metal powders include the particle size distribution, particle shape, the surface condition and the structure of the powder which impact the bulk properties such as compressibility, reactivity, flow ability, porosity, and hardenability which gets improved as particle size gets smaller.
Dr. Huang Fu Ph.D (Maebashi Institute of Technology, Maebashi, Gunma, Japan)
Metal powders can be made either by gas atomization or grinding and are then classified using dynamic classifiers to attain the precise particle size distribution. The powders are metallic, however in some instances they are blended with other forms such as polymers or ceramics. Powders resemble a behavior, which is intermediate between that of a solid and liquid.
Please feel free to send us your requirement about our products
+1 646 470 4911 (US)
+36 30 4750555 (EU)
More Silicon Products By Nanoshel
NS6130-12-000017 – Ethyl Silicate (C2H6O3Si, Purity: 40.0%)
NS6130-10-1110 – Boron Doped P Type Silicon Wafer (4 inches, Single Side Polished)
NS6130-02-207 – Silicon Carbide Powder (SiC, Beta, 1-40µm adjustable, 99.9%)
NS6130-10-1184 – Silicon Wafer N Type SiO2 (4 inches, Single Side Polished)
NS6130-10-1121 – Heavily Doped Silicon Wafer (2 inches, N Type)
NS6130-10-1177 – Silicon Wafer Gold Coated (4 inches, Single Side Polished)
NS6130-10-1058 – Silicon Nitride Sputtering Target (Si3N4, Purity: 99.99%, Dia: 50±1mm)
NS6130-10-1178 – Silicon Wafer Silver Coated (4 inches, Single Side Polished)
NS6130-10-1204 – CZ Silicon Wafer (P Type, Boron Doped, 10mm)