Alumina Slurry Polishing (Al2O3, Purity: 99.9 %, APS: 50-80nm)

Alumina Slurry Polishing

Product: Alumina Slurry Polishing (Al2O3, Purity: 99.9 %, APS: 50-80nm)

Quality Control: Each lot of NANOSHEL Alumina Slurry Polishing was tested successfully.

Alumina Slurry Polishing

SEM – Aluminium Oxide Nanoparticles

Materials Alumina Slurry Polishing
Stock No NS6130-04-425
CAS 1344-28-1 Confirm
APS 50-80nm Confirm
Purity 99.9% Confirm
Color White Confirm
pH 4-5 Confirm
Concentration 20 wt% (Available as per Customer requirement)
Dispersing Agent Organic Solvent (DMF), IPA Ethanol, Water (ddH2O)
Available Quantities 10ml, 50ml, 100ml, 250ml and larger quantities
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Si 10.8 ppm
Na 9.01 ppm
K 10.6 ppm
Fe 9.75 ppm
Cu 0.12 ppm
Ti 0.86 ppm
Mn 0.72 ppm

Experts Review:

Dr. Alan Crawford Ph.D (National Metallurgical Academy of Ukraine, Dnipropetrovsk, Ukraine)Dr. Alan Crawford Ph.D (National Metallurgical Academy of Ukraine, Dnipropetrovsk, Ukraine)
Alumina Slurry Polishing
 in soluble in the organic solvent non polar diethyl-ether, ethanol mineral acid. Aluminium oxide has evolved rapidly and found many high technology application. Aluminium oxide used in the fields of electronic devices, energy conversion, sensors and medicine.


Dr. Alte Schule Rheingau PhD. (Limerick Institute of Technology, Limerick, Ireland)Dr. Alte Schule Rheingau PhD. (Limerick Institute of Technology, Limerick, Ireland)
Alumina Slurry Polishing,   with   a   high   enthalpy   of   combustion,   is   commonly   used   in   rocket   propellant   formulations.  However, aluminum oxide  may  rapidly  form   when   aluminum   surfaces   are   exposed   in   air,   especially   superfine   aluminum   particles. Due  to  their  chemical  and  thermal  durability,  silica  coatings are of interest for protection of materials against oxidation, such as iron, carbon fibers and Co.


Dr. Bunroeun Thong, Professor (Phnom Penh Institute of Technology,Phnom Penh, Cambodia)Dr. Bunroeun Thong, Professor (Phnom Penh Institute of Technology,Phnom Penh, Cambodia)
Alumina Slurry Polishing-based, particulate-reinforced metal matrix composites (AMMCs) have been the most popular among the composite materials due to their low density and isotropic properties in addition to the superior mechanical, thermal and electrical properties. AMMCs have a more inhomogeneous structure than alloys due to presence of reinforcing particles. Such an inhomogeneous structure can enhance the pitting corrosion susceptibility, as well as cause a preferential dissolution of the interface between the matrix and the reinforcing particles.


 

Dr. Ms. Karel Gorissen (Costa Rica Institute of Technology, Alajuela, Limon)Dr. Ms. Karel Gorissen (Costa Rica Institute of Technology, Alajuela, Limon)
Alumina Slurry Polishing Core-shell particles have been attracted much interest due to their fantastic properties, different from those of single-component materials, and their synthesis has opened new directions for material research. Coating the particles with a thin shell of a compatible material makes it possible to control the core particles. The structure, size, and composition of core particles can be altered in a controllable way to tailor their magnetic, optical, mechanical, thermal, electrical, and catalytic properties.


Dr. Ralph Bressler(University of Southern Queensland, Australia)Dr. Ralph Bressler(University of Southern Queensland, Australia)
Alumina Slurry Polishing, with a high enthalpy of combustion, is commonly used in rocket propellant formulations. However, aluminum oxide may rapidly form when aluminum surfaces are exposed in air, especially superfine aluminum particles. The Al2O3 layer generally does not constructively contribute to the uses for the metal and is often considered “dead weight”, whose reduction or elimination would enhance the energy of the aluminum.


Titanium oxide Nanoparticle Dispersion Banner

Titanium oxide Nanoparticle Dispersion

free quote

Contact Us for Alumina Slurry Polishing
From us, you can easily purchase Alumina Slurry Polishing at great prices. Place online order and we will dispatch your order through DHL, FedEx, UPS. You can also request for a quote by mailing us at sales@nanoshel.com Contact: +1 302 268 6163 (US and Europe), Contact: +91-9779550077 (India). We invite you to contact us for further information about our company and our capabilities. At Nanoshel, we could be glad to be of service to you. We look forward to your suggestions and feedback.


More Aluminium Products By Nanoshel

NS6130-04-449 – Aluminum Dispersion (Al, Purity: 99.9 %, APS: 50-80nm)

NS6130-12-000241 – Aluminium Casting Alloy (Purity: 99.9%, APS: 80-100nm)

NS6130-10-1215 – Aluminium Foam (Closed Cell, 5mm)

NS6130-01-176 – TiO2 Coating Aluminium (APS: 100nm, Purity: 99.9%)

NS6130-01-153 – Aluminum Coated Silica (Al, SiO2 Coated, Purity: 99.9%, APS: <100nm)

NS6130-10-1054 – Aluminium Sputtering Target (Al, Purity: 99.99%)

NS6130-12-000150 – Aluminium Alloy 6061 (Al, Purity: 99.9%)

NS6130-04-404 – Aluminium Oxide Dispersion (Al2O3, Gamma, 99.99 %, 20-30nm)

NS6130-03-300 – Aluminum Oxide Nanopowder (Al2O3, Alpha, 99.9%, APS: <100nm)

NS6130-10-1261 – Alumina Ceramic Tiles  (Al2O3, Purity: 99.5%, Size: 100x100x9mm)