Home » ALUMINIUM ALLOY 6061 (Al, Purity: 99.9%, APS: 80-100nm)

ALLOY NANO POWDERS

Stock No. CAS MSDS Specification COA
NS6130-12-000150 7429-90-5 Specification pdf COA pdf

ALUMINIUM ALLOY 6061 (Al, Purity: 99.9%, APS: 80-100nm)

ALUMINIUM ALLOY 6061

Product : ALUMINIUM ALLOY 6061 (Al, Purity: 99.9%, APS: 80-100nm)

Quality Control: Each lot of Aluminium Alloy 6061 was tested successfully.

Composition Chart - Al Alloy 6061

Composition Chart - Al Alloy 6061

Particles Size Analysis - ALUMINIUM ALLOY 6061

Particles Size Analysis - ALUMINIUM ALLOY 6061

 
Product Aluminium Alloy 6061
Stock No NS6130-12-000150
CAS 7429-90-5 Confirm
Purity 99.9% Confirm
APS 80-100nm Confirm
Density 2.7 g/cm3 Confirm
Melting Point 660 °C Confirm
Boiling Point 2470 °C Confirm
Thermal Conductivity 176 W/m.K Confirm
Thermal Expansion 23.4 x10^-6 /K Confirm
Poisson's Ratio 0.33 Confirm
Tensile Strength >260 MPa Confirm
Electrical Resistivity 3.7 – 4.0 x10-6 Ω.cm Confirm
Modulus of Elasticity 70 GPa Confirm
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Al 95.85-98.56 %
Mg 0.8-1.2 %
Other 2 %

Expert Reviews

Dr. Ms. Guixin (Susan), Ph.D (Switzerland-Institute for Inorganic Chemistry, Zurich, Switzerland)

Nanoshel alloy nanoparticles are having chemical and physical properties which can be tuned by varying the composition and atomic ordering as well as the size of the clusters. In fact, nanoalloys may display not only magic sizes but also magic compositions, i.e., compositions at which the alloy nanoclusters present a special stability. Surface structures, compositions, and segregation properties of nanoalloys are of interest as they are important in determining chemical reactivity and especially catalytic activity.


Dr. Ralph Bressler , PhD (Belarusian State Technological University, Minsk, Belarus)

Nanoalloys are also of interest as they may display structures and properties which are distinct from those of the pure elemental clusters: the structures of binary clusters may be quite different from the structures of the corresponding pure clusters of the same size; synergism is sometimes observed in catalysis by bimetallic nanoalloys. They may also display properties which are distinct from the corresponding bulk alloys due to finite size effects, e.g., there are examples of pairs of elements (such as iron and silver) which are immiscible in the bulk but readily mix in finite clusters.


Dr. Ms. Guixin (Susan),  (University of Science and Technology of China, Hefei, Anhui, China)

Nanoshel nanoalloys with well-defined, controllable properties and structures on the nanometer scale coupled with the flexibility afforded by intermetallic materials has generated interest in bimetallic and trimetallic nanoclusters, which will be referred to as alloy nanoclusters or nanoalloys. As for bulk alloys, a very wide range of combinations and compositions are possible for nanoalloys. Bimetallic nanoalloys can be generated with, more or less, controlled size and composition.


Dr. Ana D. Gavrilovici , (University of Santiago of Chile (USACH), Chile)

Nanoshel Nanoalloys are interesting from a basic science point-of-view due to the complexity of their structures and properties. Nanoalloys are presently a very lively research area, with impressive developments in the last ten years. Nanoalloys can find an application in biosensing and nanomedicine.


Dr. Hans Roelofs , Ph.D (National Technical University of Athens, Greece)

The colloidal metal alloy NPs, especially platinum-based alloys have been the choice of catalysts in many important chemical and electrochemical reactions including oxygen reduction reaction (ORR) and direct methanol oxidation reaction (MOR). Also nanoalloys catalysts have tunable parameters, such as particle size and atomic composition, which affect critical atomic-scale structural features


Aluminium Alloy 6061

Aluminium Alloy 6061


Note
*Exchanges of materials/products are not permitted. Nanoshel does not offer refunds.
*US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted