Home » Aluminium Nanopowder for Enhanced Thermoelectric Properties (Al, 99.9%, 40nm)

METAL NANO POWDER

Stock No. CAS MSDS Specification COA
NS6130-01-107 7429-90-5 MSDS pdf Specification pdf COA pdf

Aluminium Nanopowder for Enhanced Thermoelectric Properties (Al, 99.9%, 40nm)

Aluminium Nanopowder for Enhanced Thermoelectric Properties

Aluminium Nanopowder (Al, 99.9%, 40nm, metal basis)

Quality Control: Each lot of NANOSHEL Aluminium Nanopowder was tested successfully.

SEM - Aluminium Nanopowder

SEM - Aluminium Nanopowder

Particles Size Analysis - Al Nanopowder

Particles Size Analysis - Al Nanopowder

 
Product Name Aluminium Nanopowder
Stock No NS6130-01-107
CAS 7429-90-5 Confirm
APS 40nm Confirm
Purity 99.9% Confirm
Molecular Formula Al Confirm
Molecular Weight 26.9815 g/mol Confirm
Form Powder Confirm
Color Black Grey Confirm
Density 2.70 g/cm³ Confirm
Melting Point 660.32 °C Confirm
Boiling Point 2470 °C
Thermal Expansion 23.1 µm•m-1•K-1 Confirm
Young's Modulus 70 GPa Confirm
Vickers Hardness 167 MPa Confirm
Poisson's Ratio 0.35 Confirm
Solubility Insoluble in water
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Assay 99%
All Other Metal 1000 ppm

Expert Reviews

Jules L. Routbort
Jules L. Routbort, (Argonne National Laboratory, Argonne, USA)

Aluminium Nanopowder Adding aluminium (Al) into lead selenide (PbSe), prepared n-type PbSe thermoelectric materials Thermoelectric (TE) materials and devices have interest and attention for the past decades due to their potential applications in converting solar energy and waste heat into electricity. The performance of thermoelectric materials depends on electrical conductivity, absolute temperature, lattice thermal conductivity, and electronic thermal conductivity.


Dr. Ms. Kamiko Chang, Ph.D
Dr. Ms. Kamiko Chang, Ph.D, (University of Science and Technology Beijing, China)

Aluminium Nanopowder the Seebeck coefficient is a parameter to measure the efficiency of materials in generating thermoelectric voltage from certain temperature gradient. Aluminum nano particle on the Seebeck coefficient for silicon based thermoelectric power generator is investigated. Application is partly due to the unavailability of high efficiency thermoelectric materials, and partly due to high power requirement of biomedical devices.


Dr. Nicholaos G. Demas
Dr. Nicholaos G. Demas, (Newcastle University School Of Machanical & Systems Engg. UK)

Aluminium Nanopowder thermoelectric energy conversion has attracted much interest as a possible application for environmentally friendly electric-power generators and highly reliable, accurate temperature-controllable refrigerators used as electronic devices because it is one of the simplest technologies applicable to energy conversion. The efficiency of thermoelectricity is governed by a basic property of thermoelectrical material, and the figure of merit of a thermoelectric material. Hermoelectric materials have drawn vast attentions for centuries, because thermoelectric effects enable direct conversion between thermal and electrical energy, thus providing an alternative for power generation and refrigeration.


Takeo Oku
Takeo Oku, (Department of Materials Science, The University of Shiga Prefecture, Hassaka 2500, Hikone, Shiga 522-8533, Japan)

Aluminium Nanopowder improves the sintering processes of ceramics, with high heat-transfer performance, increased density, and enhanced the thermal conductivity of sinter,  good sintering ability Aluminium  nanoparticles are highly reactive, so measures should also be taken to protect the material from moisture, heat, and sunlight.


Dr. Ms. Guixin (Susan), Ph.D
Dr. Ms. Guixin (Susan), Ph.D, (Switzerland-Institute for Inorganic Chemistry, Zurich, Switzerland)

Aluminium Nanopowder exhibit enhanced size dependant properties when compared to ultrafine or larger particles of the same material. Aluminium nanoparticles are used as ingredients in solid rocket propellant formulations and explosives. Aluminium nanoparticles are produced by various physical and chemical methods viz. wire explosion, laser ablation, combustion flame and aerosol synthesis, but micro-electrical discharge machining (micro-EDM) system has not yet explored to generate nanoparticles.


Aluminium Nanopowder

Aluminium Nanopowder