Home » Aluminium Oxide Powder (Al2O3, Gamma, APS: 50-60µm, Purity: 99.9%)

OXIDE POWDER

Stock No. CAS MSDS Specification COA
NS6130-05-522 1344-28-1 Specification pdf COA pdf

Aluminium Oxide Powder (Al2O3, Gamma, APS: 50-60µm, Purity: 99.9%)

Aluminium Oxide Powder

Product: Aluminium Oxide Powder (Al2O3, Gamma, APS: 50-60µm, Purity: 99.9%)

Quality Control: Each lot of Aluminium Oxide Powder was tested successfully.

Particles Size Analysis – Al2O3

Particles Size Analysis – Al2O3

 
Product Aluminium Oxide Powder
Stock No NS6130-05-522
CAS 1344-28-1 Confirm
Purity 99.9% Confirm
APS 50-60µm Confirm
Form Powder Confirm
Color White Confirm
Melting Point 2,072 °C Confirm
Boiling Point 2,977 °C Confirm
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Assay 99.9%

Expert Reviews

Dr. Marcus Tägtmeyer, (International Medical and Technological University, Dar es Salaam, Tanzania)

Aluminium Oxide Powder in soluble in the organic solvent non polar diethyl-ether, ethanol mineral acid. Aluminium oxide has evolved rapidly and found many high technology application. Aluminium oxide used in the fields of electronic devices, energy conversion, sensors and medicine.


Dr. Ms Jane Li, (National Penghu University of Science and Technology, Magong, Penghu,  Republic of China)

Aluminium Oxide Powder The thin films of Copper aluminum oxide with p type and N type behavior use as chemical gas sensors. Aluminum oxide thin films with proper resistance can be successfully applied as P and N type resistive gas sensors for zone detection.


Dr. Willem-Jan de Kleijn Ph.D, (Luleå University of Technology, Luleå, Sweden)

Aluminium Oxide Powder, with a high enthalpy of combustion, is commonly used in rocket propellant formulations. However, aluminum oxide may rapidly form when aluminum surfaces are exposed in air, especially superfine aluminum particles. Due to their chemical and thermal durability, silica coatings are of interest for protection of materials against oxidation, such as iron, carbon fibers and Co.


Dr. JKF Gojukai PhD,  (Kaiserslautern University of Technology, Kaiserslautern, Rhineland-Palatinate, Germany)

Aluminium Oxide Powder-based, particulate-reinforced metal matrix composites (AMMCs) have been the most popular among the composite materials due to their low density and isotropic properties in addition to the superior mechanical, thermal and electrical properties. AMMCs have a more inhomogeneous structure than alloys due to presence of reinforcing particles. Such an inhomogeneous structure can enhance the pitting corrosion susceptibility, as well as cause a preferential dissolution of the interface between the matrix and the reinforcing particles.


Dr. Huang Fu Ph.D,  (Maebashi Institute of Technology, Maebashi, Gunma, Japan)

Aluminium Oxide Powder have been attracted much interest due to their fantastic properties, different from those of single-component materials, and their synthesis has opened new directions for material research. Coating the particles with a thin shell of a compatible material makes it possible to control the core particles. The structure, size, and composition of core particles can be altered in a controllable way to tailor their magnetic, optical, mechanical, thermal, electrical, and catalytic properties.


Aluminium Oxide Powder

Aluminium Oxide Powder


Note
*Exchanges of materials/products are not permitted. Nanoshel does not offer refunds.
*US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted