Home » Aluminium Pellets (Al, Purity: 99.9%, Size : 2*5 mm)

PELLETS CHIPS & METAL BALLS

Stock No. CAS MSDS Specification COA
NS6130-12-000026 7429-90-5 MSDS pdf Specification pdf COA pdf

Aluminium Pellets (Al, Purity: 99.9%, Size : 2*5 mm)

Aluminium Pellets

Aluminium Pellets (Al, Purity: 99.9%, Size : 2*5 mm)

Quality Control: Each lot of Aluminium Pellets was tested successfully.

Aluminium Pellets

Aluminium Pellets

 
Product Aluminium Pellets
Stock No. NS6130-12-000026
CAS 7429-90-5 Confirm
APS 2*5mm,3*3mm,6*6mm Confirm
Molecular Formula Al Confirm
Color Silvery Gray Confirm
Melting Point 660.32 °C Confirm
Boiling Point 2470 °C Confirm
Density 2.70 g/cm³ Confirm
Thermal Expansion 23.1µm/(m-K) at 25 °C Confirm
Thermal Conductivity 237 W/(m-K) Confirm
Electrical Resistivity 28.2 nΩ-m (at 20 °C) Confirm
Crystallographic Structure Face Centered Cubic Confirm
Available Quantities 25Gms, 50Gms, 100Gms and larger quantities
Main Inspect Verifier Manager QC

Expert Reviews

Dr. Mark Brown
Dr. Mark Brown, (Georgia Institute of Technology in Atlanta,USA)

Metal balls are rolling, spherical elements that exhibit greater strength and toughness than plastic and ceramic balls. They have a sufficient hardness for many industrial ball applications, and most products are electrically conductive. Some steel, nickel, and cobalt balls can be magnetized. Metal balls made from certain alloys can also provide corrosion resistance and refractory resistance.


Dr. Darren Chandler
Dr. Darren Chandler, Ph.D(Manchester Metropolitan University, U.K)

Aluminium Pellets: Other applications for metal balls include proprietary, patented or specialty applications such as drilling equipment, hardness testers, swivel balls, pinball machine balls, weights, toys, bicycle parts, foosball balls, handles, knobs, skates, drawer slides, spacers, fillers, projectiles, marine parts, door locks, and coffee makers.


Dr. Jang Huang
Dr. Jang Huang, Ph.D (Shandong Science and Technology University, China)

Aluminium Pellets: Metal chips are generally irregular shaped portions of metal fragments where the key to selection is the “available surface area.” Chips come in a variety of sizes and shapes which can range from being quite large (an inch or two in diameter to fractions of inches). Generally, the smaller the chips, the more surface area there is of the material being used.


Dr. Ms. Cristiana Barzetti
Dr. Ms. Cristiana Barzetti,  (University of Cagliari-Department of Chemical Engineering and Material Science, Italy)

Pellets have hollow bases (the skirt area of the pellet) that are generally larger in diameter than the front section (known as the head of the pellet). This enables the skirt to effectively seal the bore against the pressure pushing on the base of the pellet while the friction on the head area is not too high.


Dr. Baron Augustin
Dr. Baron Augustin, Ph.D (TUM)(Technical University of Munich, Germany)

Aluminium Pellets: Metal Balls for valve applications include products for check valves and ball valves, as well as trunnion, segment, stem, three-way, four-way, poly or multiple way, and two-piece balls. Valve balls must have a controlled sphericity and sufficient tolerances for proper sealing against the valve seat.


Aluminium Pellets

Aluminium Pellets