Aluminium Silicon Alloy Powder
Product: Aluminium Silicon Alloy Powder (AlSi, APS: 60-70µm, Purity: >99.9%)
Quality Control: Each lot of Aluminium Silicon Alloy Powder was tested successfully.
|Product Name||Aluminium Silicon Alloy Powder|
|Conclusion||The specifications Confirm with enterprise standard|
|Main Inspect Verifier||Manager QC|
TYPICAL CHEMICAL ANALYSIS
Dr. Bruce Perrault, Ph.D (Georgia Institute of Technology (Georgia Tech), USA)
Aluminium Silicon Alloy are used widely in automotive and aerospace industries, the material of superior thermal, mechanical and electrical properties attention aluminum metal matrix composites. AMMCs have inhomogeneous structure them alloy due to presence of reinforcing particles.
Dr. Myron Rubenstein, Ph.D (Polytechnic University of Turin, Italy)
Aluminium Silicon Alloy conversion coatings have been widely applied for the corrosion protection of aluminum alloys. Silica treatments improve the correction resistance due to formation of protective oxides that act as barriers to oxygen diffusion to the surface. Aluminium coated silica particle plays an important role in the corrosion.
Dr. Huojin Chan (University of Science and Technology of China, Hefei, Anhui, China)
Aluminium Silicon Alloy is an important material for tri biological applications due to its good capability to be strengthened by precipitation, low density, good corrosion resistance and high thermal and electrical conductivity improved are usually reinforced by Al2O3, Sic, SiO2, B, BN. Aluminum alloy has the highest strength and ductility of the aluminum alloys with excellent mach inability and good bearing and wear properties.
Dr. Ms. Yi Yen Shi, (King Mongkut’s University of Technology Thonburi,Bangkok, Thailand)
Aluminium Silicon Alloy have been widely used in the aeronautic industry for the construction of structural components (such as fuselage panels, frames, etc.) due to their high mechanical properties, in terms of damage tolerance and tensile strength, coupled with the low weight and fabrication simplicity. On the other hand, some aluminum alloys, very sensitive to corrosion, in particular in aggressive external environments.
Dr. Hans Roelofs Ph.D (National Technical University of Athens, Greece)
Aluminium Silicon Alloy are widely used in the aeronautic industry for their high mechanical properties; however, because they are very sensitive to corrosion, surface treatments are often required. TiO2 has excellent resistance to oxidation and it is often used to improve the corrosion resistance of aluminum surfaces.
Contact Us for AlSi Alloy Powder
From us, you can easily purchase Aluminium Silicon Alloy Powder at great prices. Place online order and we will dispatch your order through DHL, FedEx, UPS. You can also request for a quote by mailing us at email@example.com Contact: +1 302 268 6163 (US and Europe), Contact: +91-9779550077 (India). We invite you to contact us for further information about our company and our capabilities. At Nanoshel, we could be glad to be of service to you. We look forward to your suggestions and feedback.
More Aluminium Products By Nanoshel
NS6130-10-1017 – Aluminum Oxide Crucibles (Available Sizes 5ml – 100ml)
NS6130-02-200 – Aluminum Nitride Nanopowder (AlN, 99.9%, 65-75nm, Hexagonal)
NS6130-04-425 – Alumina Slurry Polishing (Al2O3, Purity: 99.9 %, APS: 50-80nm)
NS6130-12-000339 – Aluminum Foil Roll for Polymer Battery (Thickness: 0.012-0.06mm)
NS6130-01-156 – Aluminum Coated Silica Nanopowder (Purity: 99.9%, APS: 20nm Metal Basis)
NS6130-10-1141 – Aluminium Oxide Sputtering Target (Al2O3, Purity: 99.99%)
NS6130-10-1267 – Aluminium Foam Panel (Closed Cell AFP, Purity: 99.9%)
NS6130-07-730 – Aluminium Manganese Alloy Powder (Al-Mg, Purity: 99.9%, APS: <80nm)
NS6130-03-304 – Aluminum Hydroxide Powder (Al2OH3, Purity: 99%, APS: 20nm)
NS6130-04-449A – Aluminum Toluene Dispersion (Al, Toluene: 80%, 50-80nm)