Aluminium Silicon Oxide Core Shell Nanoparticles
Product: Aluminium Silicon Oxide Core Shell Nanoparticles (Al/SiO2, Purity: 99.9%, APS: 80-100nm)
Quality Control: Each lot of NANOSHEL Aluminium Silicon Oxide Core Shell Nanoparticles was tested successfully.
|Product Name||Aluminium Silicon Oxide Core Shell Nanoparticles|
|CAS||7429-90-5 / 7631-86-9||Confirm|
|Shell||Silicon Oxide (SiO2)||Confirm|
|Storage Conditions||Stored in a cool and dry place, Away from the fire, Heat source||Confirm|
|Stability||Water or Organic Solvents, depends on Surface modification|
|Main Inspect Verifier||Manager QC|
Jules L. Routbort (Argonne National Laboratory, Argonne, USA)
Aluminium Silicon Oxide in soluble in the organic solvent non polar diethyl-ether, ethanol mineral acid. Aluminium oxide has evolved rapidly and found many high technology application. Aluminium oxide used in the fields of electronic devices, energy conversion, sensors and medicine.
Dr. Ms. Kamiko Chang, Ph.D(University of Science and Technology Beijing, China)
Aluminium Silicon Oxide, The thin films of Copper aluminum oxide with p type and N type behavior use as chemical gas sensors. Copper aluminum oxide thin films with proper resistance can be successfully applied as P and N type resistive gas sensors for zone detection.
Dr. Nicholaos G. Demas (Newcastle University School Of Machanical & Systems Engg. UK)
Aluminium Silicon Oxide, with a high enthalpy of combustion, is commonly used in rocket propellant formulations. However, aluminum oxide may rapidly form when aluminum surfaces are exposed in air, especially superfine aluminum particles. Due to their chemical and thermal durability, silica coatings are of interest for protection of materials against oxidation, such as iron, carbon fibers and Co.
Takeo Oku (Department of Materials Science, The University of Shiga Prefecture, Hassaka 2500, Hikone, Shiga 522-8533, Japan)
Aluminium Silicon Oxide-based, particulate-reinforced metal matrix composites (AMMCs) have been the most popular among the composite materials due to their low density and isotropic properties in addition to the superior mechanical, thermal and electrical properties. AMMCs have a more inhomogeneous structure than alloys due to presence of reinforcing particles. Such an inhomogeneous structure can enhance the pitting corrosion susceptibility, as well as cause a preferential dissolution of the interface between the matrix and the reinforcing particles.
Dr. Ms. Guixin (Susan), Ph.D (Switzerland-Institute for Inorganic Chemistry, Zurich, Switzerland)
Aluminium Silicon Oxide have been attracted much interest due to their fantastic properties, different from those of single-component materials, and their synthesis has opened new directions for material research. Coating the particles with a thin shell of a compatible material makes it possible to control the core particles. The structure, size, and composition of core particles can be altered in a controllable way to tailor their magnetic, optical, mechanical, thermal, electrical, and catalytic properties.
Please feel free to send us your requirement about our products
+1 646 470 4911 (US)
+36 30 4750555 (EU)
Nanoshel’s Product Categories Link:
METAL NANOPOWDERS, COMPOUND NANOPOWDERS, OXIDE NANOPOWDERS, ALLOY NANOPOWDERS, CLAY NANOPOWDERS, GRAPHENE NANOPOWDERS, METAL NANOWIRES & NANORODS, DOPED NANOPOWDERS, SINGLE WALL CNT, MULTI WALL CNT, DOUBLE WALL CNT, FUNCTIONALIZED SWCNT, FUNCTIONALIZED MWCNT, INDUSTRIAL MWCNT, CARBON NANOTUBE ARRAY, METAL NANO DISPERSIONS, OXIDE NANO DISPERSIONS, CNT GRAPHENE DISPERSION, BIO NANO CONJUGATE SERVISES, POSS, CORE SHELL NANOPARTICLES, ZnSE/ZnS QUANTUM DOTS, InP/ZnS QUANTUM DOTS, CdS/ZnS QUANTUM DOTS, CdSe/ZnS QUANTUM DOTS, UPCONVERTING NANOPARTICLES, PbS QUANTUM DOTS