Aluminum Manganese Alloy Nanopowder (Al:Mn, 99.9%, APS: <80nm)

Aluminum Manganese Alloy Nanopowder

Product: Aluminum Manganese Alloy Nanopowder (Al:Mn, 99.9%, <80nm)

Quality Control: Each lot of NANOSHEL Aluminum Manganese Alloy Nanopowder was tested successfully.

Aluminum Manganese Alloy Nanopowder

Composition Chart – Al:Mn Alloy Nanoparticles

Aluminium Magnesium Alloy Powder

Aluminium Magnesium Alloy Powder

Product Name Aluminum Manganese Alloy
Stock No. NS6130-7-736
CAS 12253-13-3 Confirm
Purity 99.9% Confirm
Form Powder Confirm
APS <80nm Confirm
Molecular Formula Al:Mn Confirm
Density 2.72 kg/m³ Confirm
Modulus of elasticity 69GPa Confirm
Thermal expansion (20 ºC) 23.9°Cˉ¹ Confirm
Specific heat capacity 893J/kg Confirm
Thermal conductivity 163W/m Confirm
Electric resistivity 4.16Ω Confirm
Tensile strength (annealed) 179MPa Confirm
Yield strength (annealed) 69MPa Confirm
Elongation (annealed) 20% Confirm
Shear strength (annealed) 110MPa Confirm
Fatigue strength (annealed) 97MPa Confirm
Hardness (annealed) 45HB Confirm
Tensile strength 283MPa Confirm
Yield strength 248MPa Confirm
Elongation 5% Confirm
Shear Strength 145MPa Confirm
Fatigue Strength 110MPa Confirm
Hardness 77HB Confirm
Annealing Temperature 343ºC Confirm
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Al 61 %
Mn 38 %
Si 0.2 %
Cu 0.15 %
Fe 0.6 %
H2O 0.05 %

Experts Review:

Dr. Ralph Bressler PhD (Belarusian State Technological University, Minsk, Belarus)Dr. Ralph Bressler PhD (Belarusian State Technological University, Minsk, Belarus)
Aluminum Manganese Alloy: 
Nanoshel alloy nanoparticles are having chemical and physical properties which can be tuned by varying the composition and atomic ordering as well as the size of the clusters. In fact, nanoalloys may display not only magic sizes but also magic compositions, i.e., compositions at which the alloy nanoclusters present a special stability. Surface structures, compositions, and segregation properties of nanoalloys are of interest as they are important in determining chemical reactivity and especially catalytic activity.

kritter Dr. Ms. Guixin (Susan), Ph.D (Switzerland-Institute for Inorganic Chemistry, Zurich, Switzerland)
Aluminum Manganese Alloy: 
Nanoalloys are also of interest as they may display structures and properties which are distinct from those of the pure elemental clusters: the structures of binary clusters may be quite different from the structures of the corresponding pure clusters of the same size; synergism is sometimes observed in catalysis by bimetallic nanoalloys. They may also display properties which are distinct from the corresponding bulk alloys due to finite size effects, e.g., there are examples of pairs of elements (such as iron and silver) which are immiscible in the bulk but readily mix in finite clusters.

2536582Dr. Huojin Chan (University of Science and Technology of China, Hefei, Anhui, China)
Aluminum Manganese Alloy: 
Nanoshel nanoalloys with well-defined, controllable properties and structures on the nanometer scale coupled with the flexibility afforded by intermetallic materials has generated interest in bimetallic and trimetallic nanoclusters, which will be referred to as alloy nanoclusters or nanoalloys. As for bulk alloys, a very wide range of combinations and compositions are possible for nanoalloys. Bimetallic nanoalloys can be generated with, more or less, controlled size and composition.

65562245Dr. Ana D. Gavrilovici (University of Santiago of Chile (USACH), Chile)
Aluminum Manganese Alloy: 
Nanoshel Nanoalloys are interesting from a basic science point-of-view due to the complexity of their structures and properties. Nanoalloys are presently a very lively research area, with impressive developments in the last ten years. Nanoalloys can find an application in biosensing and nanomedicine.

125448Dr. Hans Roelofs Ph.D (National Technical University of Athens, Greece)
Aluminum Manganese Alloy: 
The colloidal metal alloy NPs, especially platinum-based alloys have been the choice of catalysts in many important chemical and electrochemical reactions including oxygen reduction reaction (ORR) and direct methanol oxidation reaction (MOR). Also nanoalloys catalysts have tunable parameters, such as particle size and atomic composition, which affect critical atomic-scale structural features.

Al:Mn Alloy Nanoparticles

Aluminum Manganese Alloy Nanopowder

Contact Us:

Please feel free to send us your requirement about our products
+1 646 470 4911 (US)
+36 30 4750555 (EU)
+91-9779880077 (India)

More Aluminium Products By Nanoshel

NS6130-04-449 – Aluminum Dispersion (Al, Purity: 99.9 %, APS: 50-80nm)

NS6130-12-000241 – Aluminium Casting Alloy (Purity: 99.9%, APS: 80-100nm)

NS6130-10-1215 – Aluminium Foam (Closed Cell, 5mm)

NS6130-01-176 – TiO2 Coating Aluminium (APS: 100nm, Purity: 99.9%)

NS6130-01-153 – Aluminum Coated Silica (Al, SiO2 Coated, Purity: 99.9%, APS: <100nm)

NS6130-10-1054 – Aluminium Sputtering Target (Al, Purity: 99.99%)

NS6130-12-000150 – Aluminium Alloy 6061 (Al, Purity: 99.9%)

NS6130-04-404 – Aluminium Oxide Dispersion (Al2O3, Gamma, 99.99 %, 20-30nm)

NS6130-03-300 – Aluminum Oxide Nanopowder (Al2O3, Alpha, 99.9%, APS: <100nm)

NS6130-10-1261 – Alumina Ceramic Tiles  (Al2O3, Purity: 99.5%, Size: 100x100x9mm)