ALUMINUM OXIDE Crucibles (Available Sizes 5ml – 100ml)

Aluminum Oxide Crucible

Aluminum Oxide Crucible

Quality Control: Each lot of Nanoshel Aluminum Oxide Crucible was tested successfully.

Aluminum Oxide Crucible

Metal Crucible Line Diagram

Stock No. NS6130-10-1017
Purity >99.9% Confirm
Capacity 5ml Confirm
Density 3.90 g/cm³ Confirm
Melting Point 2072 °C Confirm
Boiling Point 2977 °C Confirm
Thermal Conductivity 30 W/m•K Confirm
Bending Strength > 350 Mpa Confirm
Compressive Strength 2200 Mpa Confirm
Max service temp 1800 °C Confirm
Hardness 17.1 GPa Confirm
Dielectric Strength 15×106 V/m Confirm
Main Inspect Verifier Manager QC
Lid Available In All Sizes (Get Quote)

Aluminum Oxide Crucible Chemical Analysis

Al2O3 ≥99 %
R2O ≤0.2 %
Fe2O3 ≤0.1 %
SiO2 ≤0.2 %

More Aluminum Oxide Crucibles Available in Different Sizes

Stock No Capacity (A)
Top Dia
(B)
Bottom Dia
(C)
Height
NS6130-10-1017 (A) 5ml 25mm (0.98in) 15mm (0.59in) 28mm (1.1in)
NS6130-10-1017 (B) 10ml 29mm (1.14in) 18mm (0.71in) 34mm (1.34in)
NS6130-10-1017 (C) 20ml 35mm (1.38in) 24mm (0.94in) 42mm (1.65in)
NS6130-10-1017 (D) 50ml 48mm (1.89in) 30mm (1.18in) 54mm (2.05in)
NS6130-10-1017 (E) 100ml 58mm (2.28in) 35mm (1.38in) 68mm (2.68in)
NS6130-10-1017 (F) 150ml 66mm (2.6in) 40mm (1.57in) 80mm (3.15in)
NS6130-10-1017 (G) 250ml 79mm (3.11in) 42mm (1.65in) 93mm (3.66in)

Experts Review:

Terence Mitchell, PhD,(ICAI School of Engineering Madrid, Spain)

Terence Mitchell, PhD,(ICAI School of Engineering Madrid, Spain)
The leading anti-corrosion character, strength at high temperature, outstanding physical mechanical properties of Nanoshel Aluminum Oxide is ideally suited for reboiling, preheating and condensing of nitric acid combinations of these acids with any other chemicals like aqua regia Nanoshel Aluminum Oxide equipments are to be made from electron beam melted high purity rod, sheet and tubings.


Dr. Steven Atkinson,Professor(University of Nottingham,UK)

Dr. Steven Atkinson,Professor(University of Nottingham,UK)
Because of its high melting point of 5432ºF, Nanoshel Aluminum Oxide has been widely used in the electronics, nuclea, aerospace and chemical industries and in such areas as crucibles, boats, heat shields and others components for vacuum furnace, where heat must be transferred to or from acids and other corrosive fluids and vapors.


Dr. Ms. Huian Ruan(Taungoo Technological University, Myanmar)

Dr. Ms. Huian Ruan(Taungoo Technological University, Myanmar)
Nanoshel Aluminum Oxide exhibits excellent resistance to most acids, especially hydrochloric, sulfuric, nitric and aqua regia at normal temperature and is also completely resistance to attack by many molten metals, including sodium, lithium, magnesium, potassium and mercury in temperatures up to 1100ºc (2000ºF)


Dr. Marco Ferro,MD PhD(University of Nordland Bodø, Norway)

Dr. Marco Ferro,MD PhD(University of Nordland Bodø, Norway)
Salts and their solutions generally do not attack Nanoshel Aluminum Oxide unless they are prone to alkaline hydrolysis or contain fluorine ions, chlorides and bromides such as ferric chloride, mercury and stannous chloride up to 175ºc (350ºF).


Metal Crucibles

Aluminum Oxide Crucible



Nanoshel’s Product Categories Link:

ZnSe/ZnS QDs WATER SOLUBLE, InP ZnS QDs SURFACE MODIFIED, CdS/ZnS QDs H2O SOLUBLE, PbS QDs SURFACE MODIFIED, ARSENIDES, LANTHANIDE NANOMATERIALS, TRANSITION METAL NANOMATERIALS, SPECIALITY CHEMICALS, MAGNETIC NANOPARTICLES, CUSTOM SYENTHESIS, METALIC FOAMS, SCREEN PRINTED BIO SENSOR, LITHIUM ION BATTERY MATERIAL, ITO COATED GLASS, POLYMERS NANO MATERIAL, NANO FABRIC COATINGS, METAL FOILS, PELLETS CHIPS METAL BALLS, WAFERS & TARGETS, SPUTTERING TARGETS, SINGLE CRYSTAL SUBSTRATES, PYROLITIC GRAPHITE, PROTECTIVE EQUIPMENTS, METAL CRUCIBLES, ALUMINA CERAMIC TILES, INORGANIC COMPOUNDS