Home » Aluminum Powder Dispersion (Al, Purity: 99.9 %, APS: 80nm)

METAL DISPERSION

Stock No. CAS MSDS Specification COA
NS6130-04-446 7429-90-5 Specification pdf COA pdf

Aluminum Powder Dispersion (Al, Purity: 99.9 %, APS: 80nm)

Aluminum Powder Dispersion

Product: Aluminum Powder Dispersion (Al, Purity: 99.9 %, APS: 80nm)

Quality Control: Each lot of NANOSHEL Aluminum Powder Dispersion was tested successfully.

SEM-Aluminium Nanoparticles

SEM-Aluminium Nanoparticles

 
Product Name Aluminium Nanoparticles Dispersion
Stock No NS6130-04-446
CAS 7429-90-5 Confirm
APS 80nm Confirm
Purity 99.9 % Confirm
Molecular Formula Al Confirm
Molecular Weight 26.98g/mol Confirm
Form Liquid Confirm
Color White Confirm
Density 3.97g/cm2 Confirm
SSA 15m2/g Confirm
pH 4-5 Confirm
Concentration 20 wt% (Available as per Customer requirement)
Dispersing Agent Organic Solvent (DMF), IPA Ethanol, Water (ddH2O)
Available Quantities 10ml, 50ml, 100ml, 250ml and larger quantities
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Assay 99.9%

Expert Reviews

Dr. Alan Crawford Ph.D
Dr. Alan Crawford Ph.D, (National Metallurgical Academy of Ukraine, Dnipropetrovsk, Ukraine)

Aluminum Powder Dispersion in soluble in the organic solvent non polar diethyl-ether, ethanol mineral acid. Aluminium oxide has evolved rapidly and found many high technology application. Aluminium oxide used in the fields of electronic devices, energy conversion, sensors and medicine.


Dr. Alte Schule Rheingau PhD
Dr. Alte Schule Rheingau PhD, (Limerick Institute of Technology, Limerick, Ireland)

Aluminum Powder Dispersion,   with   a   high   enthalpy   of   combustion,   is   commonly   used   in   rocket   propellant   formulations.  However, aluminum oxide  may  rapidly  form   when   aluminum   surfaces   are   exposed   in   air,   especially   superfine   aluminum   particles. Due  to  their  chemical  and  thermal  durability,  silica  coatings are of interest for protection of materials against oxidation, such as iron, carbon fibers and Co.


Dr. Bunroeun Thong, Professor
Dr. Bunroeun Thong, Professor, (Phnom Penh Institute of Technology,Phnom Penh, Cambodia)

Aluminum Powder Dispersion-based, particulate-reinforced metal matrix composites (AMMCs) have been the most popular among the composite materials due to their low density and isotropic properties in addition to the superior mechanical, thermal and electrical properties. AMMCs have a more inhomogeneous structure than alloys due to presence of reinforcing particles. Such an inhomogeneous structure can enhance the pitting corrosion susceptibility, as well as cause a preferential dissolution of the interface between the matrix and the reinforcing particles.


Dr. Ms. Karel Gorissen
Dr. Ms. Karel Gorissen, (Costa Rica Institute of Technology, Alajuela, Limon)

Aluminum Powder Dispersion, Core-shell particles have been attracted much interest due to their fantastic properties, different from those of single-component materials, and their synthesis has opened new directions for material research. Coating the particles with a thin shell of a compatible material makes it possible to control the core particles. The structure, size, and composition of core particles can be altered in a controllable way to tailor their magnetic, optical, mechanical, thermal, electrical, and catalytic properties.


Dr. Ralph Bressler
Dr. Ralph Bressler, (University of Southern Queensland, Australia)

Aluminum Powder Dispersion, with a high enthalpy of combustion, is commonly used in rocket propellant formulations. However, aluminum oxide may rapidly form when aluminum surfaces are exposed in air, especially superfine aluminum particles. The Al2O3 layer generally does not constructively contribute to the uses for the metal and is often considered “dead weight”, whose reduction or elimination would enhance the energy of the aluminum.


Aluminium Nanoparticles Dispersion

Aluminium Nanoparticles Dispersion