Home » Aluminum Toluene Dispersion (Al, Toluene: 80%, 50-80nm)

METAL DISPERSION

Stock No. CAS MSDS Specification COA
NS6130-04-449A 7429-90-5 Specification pdf COA pdf

Aluminum Toluene Dispersion (Al, Toluene: 80%, 50-80nm)

Aluminum Toluene Dispersion Nanopowder

Product: Aluminum Toluene Dispersion Nanopowder (Al, Toluene: 80%, 50-80 nm)

Quality Control: Each lot of Aluminium Nanoparticles Dispersion was tested successfully.

 
Product Aluminium Nanoparticles Dispersion
Stock No NS6130-04-449A
CAS 7429-90-5 Confirm
APS 50-80nm Confirm
Purity 99.9 % Confirm
Molecular Formula Al Confirm
Molecular Weight 26.98g/mol Confirm
Form Liquid Confirm
Color Light Grey Confirm
Density 3.97g/cm2 Confirm
SSA 15-34 m2/g Confirm
pH 4-5 Confirm
Concentration 20% in Toluene (Avail as per Customer requirement)
Available Quantities 10ml, 50ml, 100ml, 250ml and larger quantities
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Assay 99.9%

Expert Reviews

Dr. Alan Crawford Ph.D, (National Metallurgical Academy of Ukraine, Dnipropetrovsk, Ukraine)

Aluminum Toluene in soluble in the organic solvent non polar diethyl-ether, ethanol mineral acid. Aluminium oxide has evolved rapidly and found many high technology application. Aluminium oxide used in the fields of electronic devices, energy conversion, sensors and medicine.


Dr. Alte Schule Rheingau PhD, (Limerick Institute of Technology, Limerick, Ireland)

Aluminum Toluene The thin films of Copper aluminum oxide with p type and N type behavior use as chemical gas sensors. Copper aluminum oxide thin films with proper resistance can be successfully applied as P and N type resistive gas sensors for zone detection.


Dr. Bunroeun Thong, Professor, (Phnom Penh Institute of Technology,Phnom Penh, Cambodia)

Aluminum Toluene,   with   a   high   enthalpy   of   combustion,   is   commonly   used   in   rocket   propellant   formulations.  However, aluminum oxide  may  rapidly  form   when   aluminum   surfaces   are   exposed   in   air,   especially   superfine   aluminum   particles. Due  to  their  chemical  and  thermal  durability,  silica  coatings are of interest for protection of materials against oxidation, such as iron, carbon fibers and Co.


Dr. Ms. Karel Gorissen, (Costa Rica Institute of Technology, Alajuela, Limon)

Aluminum Toluene-based, particulate-reinforced metal matrix composites (AMMCs) have been the most popular among the composite materials due to their low density and isotropic properties in addition to the superior mechanical, thermal and electrical properties. AMMCs have a more inhomogeneous structure than alloys due to presence of reinforcing particles. Such an inhomogeneous structure can enhance the pitting corrosion susceptibility, as well as cause a preferential dissolution of the interface between the matrix and the reinforcing particles.


Dr. Ralph Bressler, (University of Southern Queensland, Australia)

Aluminum Toluene Core-shell particles have been attracted much interest due to their fantastic properties, different from those of single-component materials, and their synthesis has opened new directions for material research. Coating the particles with a thin shell of a compatible material makes it possible to control the core particles. The structure, size, and composition of core particles can be altered in a controllable way to tailor their magnetic, optical, mechanical, thermal, electrical, and catalytic properties.


Aluminium Nanoparticles Dispersion

Aluminium Nanoparticles Dispersion