Home » Amine Modified Single Walled Carbon Nanotubes (Purity:80-90wt% OD:1-2nm, Length:15-30µm)

FUNCTIONALIZED SWCNT

Stock No. CAS MSDS Specification COA
NS6130-06-636 308068-56-6 Specification pdf

Amine Modified Single Walled Carbon Nanotubes (Purity:80-90wt% OD:1-2nm, Length:15-30µm)

Amine Modified Single Walled Carbon Nanotubes

Product: Amine Modified Single Walled Carbon Nanotubes (Purity:80-90wt% OD:1-2nm, Length:15-30µm)

Quality Control: Each lot of Amine Modified Single Walled Carbon Nanotubes was tested successfully.

Amine Modified Single Walled Carbon Nanotubes

Amine Modified Single Walled Carbon Nanotubes

XPS Spectra Amine Modified Single Walled Carbon Nanotubes

XPS Spectra Amine Modified Single Walled Carbon Nanotubes

 
Product Amine Modified Single Walled Carbon Nanotubes
Stock No NS6130-06-636
CAS No 308068-56-6 Confirm
Category SA-ML-3 Confirm
Avg. Diameter 1-2nm Confirm
Length 15-30µm Confirm
Purity >80% (SWCNT) Confirm
Amorphous carbon 5% Confirm
Residue ( calcination in air) <5% Confirm
Amine (NH2) Surface Modified 1 - 2wt% Confirm
Special Surface Area 350-450* m²/g Confirm
Bulk density 0.05-0.17 g/cm³ Confirm
Real density 2-3 g/cm³ Confirm
Charging * 2180 (Capacity: mA h/g) Confirm
Discharging* 534 (Capacity: mA h/g) Confirm
Volume Resistivity 0.1-0.15 Ω.cm ( measured at pressure in powder) Confirm
Available Quantities 2Gms, 5Gms, 10Gms, 25Gms and larger quantites
Main Inspect Verifier Manager QC

Expert Reviews

Dr. Changsik Yoo, Ph.D, (Nanyang Technological University, Singapore)

Pristine carbon nanotubes (CNTs) are insoluble in many liquids such as water, polymer resins, and most solvents. This means they are difficult to evenly disperse in a liquid matrix such as epoxies and other polymers, complicating efforts to utilize CNTs’ outstanding physical properties in the manufacture of nanocomposite materials, as well as in other practical nanotechnology applications which require preparation of uniform mixtures of CNTs with many different organic, inorganic, and polymeric materials.


Dr. Bram van Andel, Ph.D, (International Medical and Technological University, Dar es Salaam, Tanzania)

To make nanotubes more easily dispersible in liquids, it is necessary to physically or chemically attach certain molecules, or functional groups, to their sidewalls without significantly changing the nanotubes’ desirable properties. This process is called functionalization.


Dr. Ana D. Gavrilovici, (University of Santiago of Chile (USACH), Chile)

Single-walled CNTs arguably are the ultimate biosensor among nanoscale semiconducting materials not only for their size – which is directly comparable to the size of single biomolecules – but also because their low charge-carrier density is directly comparable to the surface charge density of proteins. Furthermore, a single-walled CNT (SWCNT) consists solely of surface such that every single carbon atom is in direct contact with the environment, allowing optimal interaction with nearby biomolecules..


Dr. Yeng-Tim Liu, (National Taiwan University of Science and Technology, Taiwan)

Generally, the smart functionalization of CNTs with chemically, biochemically, or electrochemically functional materials could provide a straightforward approach to the development of nanostructured electrochemical devices with promising properties and striking applications.


Dr. Sheng Choy Wong Ph.D, (University of the Philippines College of Engineering, Quezon City, Philippines)

The strategies for the functionalization of the CNTs have strongly relied on the interactions inherent to the CNTs and the materials, which are mainly dependent on the structural and chemical properties of the materials.


Amine Modified Single Walled Carbon Nanotubes

Amine Modified Single Walled Carbon Nanotubes


Note
*Exchanges of materials/products are not permitted. Nanoshel does not offer refunds.
*US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted