Home » APTES (C9H23NO3Si,Purity: 99.9%)

INORGANIC COMPOUNDS

Stock No. CAS MSDS Specification COA
NS6130-12-000672 919-30-2 MSDS pdf Specification pdf COA pdf

APTES

(C9H23NO3Si,Purity: 99.9%)

NS000672

 
Product APTES
Chemical Name (3-Aminopropyl)triethoxysilane
Stock No NS6130-12-000672
CAS 919-30-2 Confirm
Purity 99.9% Confirm
Molecular Formula C9H23NO3Si Confirm
Molecular Weight 221.37g/mol Confirm
Form Liquid Confirm
Color Colorless Confirm
Density 0.94 g/cm³ Confirm
Melting Point -70°C Confirm
Boiling Point 217°C Confirm
Flash Point 208.4° F, 98° C Confirm
Vapor Pressure <10mm Hg (100° C) Confirm
Vapor Density 7.7g/l Confirm
Refractive Index 1.423 Confirm
Explosion Limits Lower: 0.8% Upper: 4.5 Confirm
Quality Control Each lot of APTES was tested successfully.
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Assay 99.9%

Expert Reviews

Dr. Marcus Tägtmeyer, , (International Medical and Technological University, Dar es Salaam, Tanzania)

APTES: An inorganic compound is the opposite of an organic compound.An inorganic compound can be considered as a compound that does not contain a carbon to hydrogen bond (C-H) bond. Moreover, inorganic compounds tend to be minerals or geologically based compounds that do not contain carbon and hydrogen bonds. Most of the inorganic compounds contain a metal. The majority of compounds is inorganic in nature. Inorganic compounds have an overwhelming amount of applications and practical uses in the world.


Dr. Ms Jane Li, ,  (National Penghu University of Science and Technology, Magong, Penghu,  Republic of China)

APTES: As many inorganic compounds contains some type of metal like alkali, alkaline, transition they tend to be able to conduct electricity. In solid state inorganic compounds are poor conductors of electricity. But in liquid phase, inorganic compounds are highly conductive.In liquid phase inorganic compounds electrons are able to move very freely, and this movement of electrons is noted as electricity.


Dr. Willem-Jan de Kleijn Ph.D, , (Luleå University of Technology, Luleå, Sweden)

APTES: Due to ionic bonding in inorganic compounds, they are held together with high rigidly and posses extremely high melting and boiling points. Other distinct characteristic of inorganic compounds is their colour. Transition metal inorganic compounds are highly coloured due to configuration of d-block elements. Inorganic compounds display a unique colour when burned. Inorganic compounds are trypically highly soluble in water. Inorganic compounds have ability to form crystals.


Dr. JKF Gojukai PhD, , (Kaiserslautern University of Technology, Kaiserslautern, Rhineland-Palatinate, Germany)

APTES: Inorganic compounds are used as catalysts, pigments, coatings, surfactants, medicines, fuels, and more. They often have high melting points and specific high or low electrical conductivity properties.


Dr. Huang Fu Ph.D, , (Maebashi Institute of Technology, Maebashi, Gunma, Japan)

APTES: Potential applications of inorganic compounds are as: Ammonia is a nitrogen source in fertilizer, and it is one of the major inorganic chemicals used in the production of nylons, fibers, plastics, polyurethanes (used in tough chemical-resistant coatings, adhesives, and foams, hydrazine and explosive. Chlorine is used in the manufacture of polyvinyl chloride (used for pipes, clothing, furniture etc.), agrochemicals (e.g fertilizers, insectisides, soil treatment) and pharmaceuticals.


APTES

APTES


Note
*Exchanges of materials/products are not permitted. Nanoshel does not offer refunds.
*US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted