Home » Automatic Mist Based Sanitizer Dispensing Unit
Product | Automatic Mist Based Sanitizer | |
Stock No | NS6130-10-1509 | |
Dimensions | 36cm x 30cm x 22cm | Confirm |
Electrical Input | 230V AC (5Amp) | Confirm |
Power Consuption (Idle Mode) | <3VA | Confirm |
Power Consuption (Spraying Mode) | 25VA | Confirm |
Weight of Unit | 5Kg (without sanitzer) | Confirm |
Mounting Style | Wall Mount | Confirm |
Outer Body Material | ABS/PVC/FRP | Confirm |
Sanitizer Container Capacity | 5Lts | Confirm |
Tank Material | ASB/PVC/FRP | Confirm |
Solenoid Valve (Voltage) | 24V DC | Confirm |
Booster Pump Voltage | 24V DC | Confirm |
Pressure | 5-6 bar | Confirm |
IP Rating | IP 54 | Confirm |
Atomizer Nozzle Material | Plastic (Chemical Resistant) | Confirm |
Flow Rate | 1-2 ml (Each Operation) | Confirm |
Ultrasonic Sensor Material | Plastic | Confirm |
IP Rating | IP 67 | Confirm |
Min Sensing Distance | 2 cm | Confirm |
Max hand Distance | 20 cm | Confirm |
Control Circuit | Works on EPS8266 controller | Confirm |
Note: | The firmware in the controller can be updated over the air, by creating smart-phone Wi-Fi hotspot | |
Note: | The module with Air as medium is a non-contact target detection and distance measurement module | |
Note: | The Pump is used to provide increased pressure to the inlet of spray nozzle for atomizing. | |
Quality Control | Each lot of Automatic Mist Based Sanitizer was tested successfully. | |
Main Inspect Verifier | Manager QC |
Note *Exchanges of materials/products are not permitted. Nanoshel does not offer refunds. *US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted