Home » Boron Nanopowder Crystalline (B, Purity: 99.5%, APS: <80nm)
METAL NANO POWDER
| Stock No. | CAS | MSDS | Specification | COA |
|---|---|---|---|---|
| NS6130-12-000031 | 7440-42-8 |
|
|
|
Boron Nanopowder Crystalline
(B, Purity: 99.5%, APS: <80nm)
Particles Size Analysis
| Product | Boron Nanopowder Crystalline | |
| Stock No | NS6130-12-000031 | |
| CAS | 7440-42-8 | Confirm |
| Purity | 99.5% | Confirm |
| APS | <80nm | Confirm |
| Molecular Formula | B | Confirm |
| Molecular Weight | 10.81g/mol | Confirm |
| Form | Powder | Confirm |
| Color | Light Brown | Confirm |
| Density | 2.34 g/mL at 25 °C(lit.) | Confirm |
| Melting Point | 2,076 °C | Confirm |
| Boiling Point | 3927 °C | Confirm |
| Quality Control | Each lot of Boron Nanopowder Crystalline was tested successfully. | |
| Main Inspect Verifier | Manager QC | |
Typical Chemical Analysis
| Assay | 99.5% |
| Other Metal | 4500ppm |
Expert Reviews
Dr. Ms. Kamiko Chang, Ph.D, (University of Science and Technology Beijing, China)
Boron Nanopowder have a diverse range of applications in areas such as semiconductors protective coatings, high density fuels and cancer treatment. Boron neutron capture therapy usually relies on soluble, rather than particulate, boron compounds. The use of a novel boron nanoparticle for boron neutron capture therapy. Two hundred and fifty thousand B16-OVA tumour cells, pre-incubated with boron nanoparticles for 12 hours, were injected subcutaneously into C57BL/6J mice. The tumour sites were exposed to different doses of neutron radiation one, four, or eight days after tumour cell inoculation.
Dr. Nicholaos G. Demas, (Newcastle University School Of Machanical & Systems Engg. UK)
Boron Nanopowder (BNPs) are of great interest for applications such as neutron capture therapy of cancer cells, hydrogen generation from water, and high energy density fuels. Water splitting by reaction with boron used high temperature steam with external heating. Boron carbide is widely used materials for its attractive combination of properties such as high hardness, low density, high melting point, excellent thermoelectric properties, etc. As well, sintered boron carbide is commonly used, also its powder is applicable for many areas of industry.
Dr. Myron Rubenstein, Ph.D, (Polytechnic University of Turin, Italy)
Boron Nanopowder is a metalloid chemical element with symbol B and atomic number 5. Produced entirely by cosmic ray spallation and supernovae and not by stellar nucleosynthesis, it is a low-abundance element in the Solar system and in the Earth’s crust. Boron is concentrated on Earth by the water-solubility of its more common naturally occurring compounds, the borate minerals.These are mined industrially as evaporites, such as borax and kernite. Chemically uncombined boron is found in small amounts in meteoroids but is not found naturally on Earth. Industrially, very pure boron is produced with difficulty because of refractory contamination by carbon or other elements. Several allotropes of boron exist: amorphous boron is a brown powder; crystalline boron is silvery to black, extremely hard and a poor electrical conductor at room temperature. The primary use of elemental boron is as boron filaments with applications.
Dr. Ms. Guixin (Susan), Ph.D, (Switzerland-Institute for Inorganic Chemistry, Zurich, Switzerland)
Elemental boron is a highly attractive fuel for propellants and explosives.1,2 Of all the chemical elements, boron has the highest volumetric heat of combustion (140 kJ cm3) and the third highest gravimetric heat of combustion (59 kJ g1), after H2 and Be. These values are over 3 times higher per unit volume, and 1.4 times higher per unit mass, than those of hydrocarbon fuels. Nanofluid dispersion and coating selection technical guidance is also available. Other nanostructures include nanorods, nanowhiskers, nanohorns, nanopyramids and other nanocomposites. Surface functionalized nanoparticles allow for the particles to be preferentially adsorbed at the surface interface using chemically bound polymers.
Boron Nanopowder Crystalline
From us, you can easily purchase Boron Nanopowder Crystalline at great prices. Place online order and we will dispatch your order through DHL, FedEx, UPS. You can also request for a quote by mailing us at sales@nanoshel.com. We invite you to contact us for further information about our company and our capabilities. At Nanoshel, we could be glad to be of service to you. We look forward to your suggestions and feedback.
sales@nanoshel.com
cmg@nanoshel.com
sales5@nanoshel.com
USA - Sales/Research:
+1 646 470 4911
UK - Sales/Research:+44 1782 454 144
Ireland - Sales/Research:+354 71 985 3714
India - Sales/Research:+91-9779550077
+91-9779238252
Note *Exchanges of materials/products are not permitted. Nanoshel does not offer refunds. *US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted
Ask Nanoshel
Please feel free to
send us your
requirement
about our products
search
Search by Product, Stock No and CAS
Jules L. Routbort, (Argonne National Laboratory, Argonne, USA)
Boron Nanopowder Nanoscale Boron Oxide Particles are typically 20-80 nanometers (nm) with specific surface area (SSA) in the 10 – 50 m 2 /g range and also available in with an average particle size of 100 nm range with a specific surface area of approximately 7- 10 m 2 /g. Nano Boron Oxide Particles are also available in ultra high purity and high purity, transparent, and coated and dispersed forms.