Boron Nitride Alloy Powder (BN, Purity: 99.9%, APS: -325mesh)

Boron Nitride Alloy Powder

Product: Boron Nitride Alloy Powder (BN, Purity: 99.9%, APS: -325mesh)

Quality Control: Each lot of Boron Nitride Alloy Powder was tested successfully.

Boron Nitride Alloy Powder

Composition Chart – Boron Nitride Alloy Powder

Material Boron Nitride Alloy Powder
Stock No NS6130-12-000141
CAS 10043-11-5 Confirm
APS -325mesh Confirm
Purity 99.9% Confirm
Molecular Formula BN Confirm
Molecular Weight 24.82 g/mol Confirm
Appearance Colorless Crystals Confirm
Density 2.1g/cm³ Confirm
Melting Point 2,973 °C Confirm
Specific heat capacity 19.7 J/(K·mol) Confirm
Mohs Hardness 20 °C: ~2 Confirm
Solubility Insoluble in water
Main Inspect Verifier Manager QC

Typical Chemical Analysis

hBN 69%
Ni 13%
Cr 8%
Al 6±0.5%
Fe 3±0.5%
All Other Metal 0.01%

Experts Review:

58496396Dr. Bruce Perrault, Ph.D (Georgia Institute of Technology (Georgia Tech), USA)
Boron Nitride Alloy Powder is used as propellant additives that can regenerative coat and harden steel barrels. The BN is in the form of a nano-particle that can be evenly dispersed in the propellant without negative impact on its performance. BN propellant shows less erosion than the baseline propellant, the sample size is clearly too small for the results to be considered proof that the BN does reduce erosion.

1252525Dr. Myron Rubenstein, Ph.D (Polytechnic University of Turin, Italy)
Boron Nitride Alloy Powder is a chemical compound in which its chemical formula BN consists of equal numbers of boron and nitrogen atoms. The hardness of Boron nitride is inferior only to diamond. Because of excellent thermal and chemical stability, Boron Nitride is widely used in mechanical applications.

2536582Dr. Huojin Chan (University of Science and Technology of China, Hefei, Anhui, China)
Boron Nitride Alloy Powder properties are high thermal conductivity, low thermal expansion, good thermal, shock resistance, low resistance, high electrical resistance, low dielectric constant and non toxicity.   BN nanostructures are expected to be useful as electronic devices, field-effect transistors, high heat-resistant semiconductors, insulator lubricants, nanowires, magnetic nanoparticles and gas storage materials.

10604509_1459864657612760_2405225879143508610_oDr. Ms. Yi Yen Shi, (King Mongkut’s University of Technology Thonburi,Bangkok, Thailand)
Boron Nitride Alloy Powder
 provide excellent protection against oxidation and wear, and they are electrical insulators. Therefore, magnetic nanoparticles coated with BN layers are very attractive candidates for applications such as MRI imaging or magnetic data storage.

125448Dr. Hans Roelofs Ph.D (National Technical University of Athens, Greece)
Boron Nitride Alloy Powder (BN) is also known as ‘White Graphite’, has similar (hexagonal) crystal structure as of Graphite. (h-BN) is a wide band-gap material with outstanding mechanical, electrical and optical properties. It consists of a layered structure that is very similar to graphite.


Boron Nitride Alloy Powder

Contact Us:

Please feel free to send us your requirement about our products
+1 646 470 4911 (US)
+36 30 4750555 (EU)
+91-9779880077 (India)

Nanoshel’s Most Moving Products:

NS6130-01-101 – Silver (Ag) Nanoparticles / Nanopowder (Ag, 99.99%, 80-100 nm, metal basis)

NS6130-01-105 – Aluminium Nanoparticles/Nanopowder (Al, 99.9%, APS: 100nm, Metal basis)

NS6130-01-128 – Copper Nanoparticles/Nanopowder (Cu, Purity: 99.9%, APS: 80-100nm, Metal Basis)

NS6130-01-108 – Gold (Au) Nanopowder (Au, 99.99+%, 50-100 nm)

NS6130-02-219 – Antimony Tin Oxide Nanoparticles (ATO, SnO2:Sb2O3=90:10, 99.8%, 30nm)

NS6130-03-301 – Aluminium Oxide Nanopowder (Al2O3, 99.99%, <100nm)

NS6130-03-341 – Silicon Oxide Nanopowder (SiO2, S-type, Purity: 99.9%, APS: 15-20nm)

NS6130-03-350 – Titanium Oxide Nanopowder (TiO2, Anatase, 99.9%, 10-25nm)

NS6130-10-1002 – P Type Silicon Wafer (4″ Boron Doping)

NS6130-03-341 – SiO2 Nanoparticles (Silicon Dioxide, 15-20nm, 99.9%, S-type)

NS6130-10-1007 – Metallic Copper Foamposite (Cu, PPI-50PPI, Thickness; 2mm)

NS6130-10-1052 – Titanium Sputtering Target (Ti, Purity: 99.99%)

NS6130-10-1214 – Aluminium Metal Foam (Al, Closed Cell, 2-11mm)

NS6130-10-1233 – Screen Printed Electrodes (3-electrodes)

NS6130-06-640 – Pristine MWCNT (99%, OD:10-20nm, Length:3-8μm)

NS6130-06-601 – Single Walled Carbon Nanotubes (>98wt% OD:1-2nm, Length:3-8µm, High Purity)

NS6130-06-680 – Industrial Grade Carbon Nanotubes in bulk quantities

NS6130-06-659 – COOH Functionalized CNT (Carbon Nanotubes, OD: 10-20nm, Length: 3-8µm)

NS6130-03-364 – Single Layer Graphene (C, >50%, Thickness 0.5-6nm, Lateral Size 1-10µm)

NS6130-03-365 – Multilayer Graphene (C, 4-6 Layer Flakes, >80%, 1-10µm)

NS6130-06-659 – COOH Functionalized CNT (Carbon Nanotubes, OD: 10-20nm, Length: 3-8µm)

NS6130-09-907 – Montmorillonite (Natural montmorillonite Modified, >99%, <80nm)