Chromium Metal Chips (Cr, Purity: 99.9%, Size : 2-5 mm)

Highly Pure – Chromium Metal Chips

Product: Chromium Metal Chips (Cr, Purity: 99.9%, Size : 2-5 mm)

Quality Control: Each lot of NANOSHEL Chromium Metal Chips was tested successfully.

Chromium Metal Chips

Chromium Metal Chips

 

Product Name Chromium Metal Chips
Stock No. NS6130-12-000024
CAS 7440-47-3 Confirm
Size 2-5 mm Confirm
Appearance Silvery Metallic Powder Confirm
Molecular Formula Cr Confirm
Density 7.19 g/cm³ Confirm
Melting Point 1907 °C Confirm
Boiling Point 2671 °C Confirm
Thermal Expansion 4.9µm/(m-K) at 25 °C Confirm
Thermal Conductivity 93.9 W/(m-K) Confirm
Crystallographic Structure Body Centered Cubic Confirm
Available Quantities 25Gms, 50Gms, 100Gms and larger quantities
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Cr ≥ 99.5 %
Fe ≤ 0.18 %
Cu ≤ 0.01 %
O ≤ 0.20 %
S ≤ 0.01 %
Si ≤ 0.08 %
Al ≤ 0.10 %
N ≤ 0.04 %

Experts Review:

58496396Dr. Bruce Perrault, Ph.D (Georgia Institute of Technology (Georgia Tech), USA)
Chromium Metal Chips is a chemical element with symbol Cr and atomic number 24. It is the first element in Group 6. It is a steely-grey, lustrous, hard and brittle metal which takes a high polish, resists tarnishing, and has a high melting point. Chromium metal is of high value for its high corrosion resistance and hardness.


1252525Dr. Myron Rubenstein, Ph.D (Polytechnic University of Turin, Italy)
Chromium Metal Chips are hard and their general use is to provide hard wear-resistant coatings on parts that need to be protected. When combined with a protective metal matrix, corrosion-resistant as well as wear-resistant coatings can be developed that are easy to apply and cost effective. These coatings are applied by either welding or thermal spray. When combined with other carbides, chromium carbide can be used to form cutting tools.


2536582Dr. Huojin Chan (University of Science and Technology of China, Hefei, Anhui, China)
Chromium Metal Chips trend in the welding industry, which is moving from the use of stick electrodes to flux cored wire is benefiting chromium carbide. Chromium carbide is used almost exclusively in flux cored wire instead of high carbon ferrochrome as it does not suffer from the dilution effect caused by the extra iron in the high carbon ferrochrome. This means that a coating containing a greater number of hard chromium carbide particles can be produced, which exhibits greater wear resistance.


10604509_1459864657612760_2405225879143508610_oDr. Ms. Yi Yen Shi, (King Mongkut’s University of Technology Thonburi,Bangkok, Thailand)
Chromium Metal Chips carbide-based coatings have a wear resistance which is between two and a half and five times better than hard chrome plating and do not suffer from effluent disposal problems. They are therefore finding increasing use at the expense of hard chrome plating, particularly if wear resistance is important or if a thick coating is required on a large part. This is an exciting and rapidly growing area which will become more important as the cost of complying with environmental legislation becomes greater.


125448Dr. Hans Roelofs Ph.D (National Technical University of Athens, Greece)
Chromium Metal Chips
 Diamalloy powders are characterized by their ability to provide wear, oxidation and hot corrosion resistance at elevated temperatures. The addition of NiCr cladding improves corrosion properties. Higher NiCr content results  increased fracture toughness of the coatings.


Chromium Metal Chips Banner

Chromium Metal Chips

free quote

Contact Us for Chromium Metal Chips
From us, you can easily purchase Chromium Metal Chips at great prices. Place online order and we will dispatch your order through DHL, FedEx, UPS. You can also request for a quote by mailing us at sales@nanoshel.com Contact: +1 302 268 6163 (US and Europe), Contact: +91-9779550077 (India). We invite you to contact us for further information about our company and our capabilities. At Nanoshel, we could be glad to be of service to you. We look forward to your suggestions and feedback.


More Products by Nanoshel

NS6130-10-1271 – Silicon Carbide Balls (SiC, Purity: 99.9% Dia: 1mm)

NS6130-10-1272 – Steel E52100 Balls (Fe, Purity: 99.9%, Dia: 12.7 mm)

NS6130-12-000022 – Tin Metal Shots (Sn, Purity: 99.9%, Size: 2-5 mm)

NS6130-12-000023 – Iron Metal Chips (Fe, Purity: 99.9%, Size: 2-5 mm)

NS6130-12-000024 – Chromium Metal Chips (Cr, Purity: 99.9%, Size: 2-5 mm)

NS6130-12-000025 – Nickel Metal Wires (Ni, Purity: 99.9%, Thickness: 0.5 mm)

NS6130-12-000026 – Aluminium Pellets (Al, Purity: 99.9%, Size: 2*5 mm)

NS6130-12-000028 – Magnesium Chips (Mg, Purity: 99.9%, Size: 2.5 mm)

NS6130-12-000029 – Manganese Chips (Mn, Purity: 99.9%, Size: 2.5 mm)

NS6130-12-000030 – Zinc Metal Shots (Zn, Purity: 99.9%, Size: 2-5 mm)