Home » Cobalt Oxide Nanoparticles (Co3O4, 99.9%, 20nm)


Stock No. CAS MSDS Specification COA
NS6130-03-308 1308-06-1 MSDS pdf Specification pdf COA pdf

Cobalt Oxide Nanoparticles (Co3O4, 99.9%, 20nm)

Cobalt Oxide Nanoparticles

Cobalt Oxide Nanoparticles (Co3O4, 99.9%, 20nm)

Quality Control: Each lot of NANOSHEL Co3O4 was tested successfully.

SEM-Cobalt Oxide Nanoparticle

SEM-Cobalt Oxide Nanoparticle

Particles Size of Analysis-Co3O4

Particles Size of Analysis-Co3O4

Product Name Cobalt Oxide Nanopowder
Stock No NS6130-03-308
CAS 1308-06-1 Confirm
HS Code 28220010 Confirm
APS 20nm Confirm
Purity 99.9% Confirm
Molecular Formula Co3O4 Confirm
Molecular Weight 240.80 g/mol Confirm
Form Powder Confirm
Color Green Greyish Confirm
Density 6.1 g/cm3 Confirm
Melting Point 900 ºC Confirm
Morphology Spherical Confirm
SSA ≥10 m2/g Confirm
Solubility Soluble in Acids and Alkalis
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Assay 99.9%
Other Metal 1000ppm

Expert Reviews

Dr. Baron Augustin, Ph.D(TUM)
Dr. Baron Augustin, Ph.D(TUM), (Technical University of Munich, Germany)

Cobalt Oxide Nanoparticles (CoO and Co3O4) to prepare their nanoparticles. Nanoparticles of Co3O4 are promising materials for electronic devices, and laser ablation of Co3O4 has been carried out only in the gas phase. CoO is also an important material, for example, it is known as a gas sensing material.

Dr. Mark Brown
Dr. Mark Brown , (Georgia Institute of Technology in Atlanta,USA)

Cobalt Oxide Nanoparticles can also be used in several military applications such as high-performance invisible materials for absorbing extremely high frequency (EHF) millimeter wave (MMW), visible light and infrared.

Dr. Ms. Cristiana Barzetti
Dr. Ms. Cristiana Barzetti , (University of Cagliari-Department of Chemical Engineering and Material Science, Italy)

Cobalt Oxide Nanoparticles has been used in the manufacture of semi-conductors devices containing gold or platinum.  Cobalt can be diffused through the substrate and then gold or platinum is diffused in at a temperature sufficient to replace the cobalt but somewhat lower than would otherwise be required.

Dr. Jang Huang, Ph.D
Dr. Jang Huang, Ph.D , (Shandong Science and Technology University, China)

Cobalt Oxide Nanoparticles Li-ion battery contains by far the greatest amount of cobalt per cell. The cathode  active material contains 60% cobalt rather than the 5-15% of Ni electrode cells and accounts for about 50%  of the weight of the cathode.

Dr. Darren Chandler, Ph.D
Dr. Darren Chandler, Ph.D, (Manchester Metropolitan University, U.K)

Cobalt Oxide Nanoparticles, in the form of fine powder, oxide or hydroxide, is  used as additive in these electrodes for the following reasons:  It drastically improves the conductivity of the nickel electrode,  It mechanically stabilises the electrode by inhibiting the formation of  -NiOOH and reduces the rigidity of  the nickel hydroxide deposit,  It increases the potential for electrolyte decomposition.