Cobalt Oxide Nanopowder
Product: Cobalt Oxide Nanopowder (Co3O4, Purity: 99.9%, <80nm)
Quality Control: Each lot of NANOSHEL Cobalt Oxide Nanopowder was tested successfully.

Cobalt Oxide Nanopowder
Material | Cobalt Oxide Nanopowder | |
Stock No | NS6130-03-307 | |
CAS | 1308-06-1 | Confirm |
APS | <80nm | Confirm |
Purity | 99.9% | Confirm |
Color | Green Greyish | Confirm |
Molecular Formula | Co3O4 | Confirm |
Density | 6.1 g/cm3 | Confirm |
Molecular Weight | 240.80 g/mol | Confirm |
Melting Point | 900 ºC | Confirm |
Specific surface area | ≥10 m²/g | Confirm |
Morphology | Spherical | Confirm |
Solubility | Soluble in Acids and Alkalis | Confirm |
Soluble in Water | Insoluble | Confirm |
Available Quantities | 25Gms, 50Gms, 100Gms and larger quantities | |
Main Inspect Verifier | Manager QC |
Typical Chemical Analysis
Co | 70-74% |
Ni | 0.02 % |
Fe | 0.01 % |
Pb | 0.01 % |
Mn | 0.01 % |
Cu | 0.003 % |
Ca | 0.01 % |
Mg | 0.01 % |
Na | 0.01 % |
Si | 0.02 % |
Al | 0.01 % |
S | 0.01 % |
Experts Review:
Dr. Baron Augustin, Ph.D (TUM)(Technical University of Munich, Germany)
Cobalt Oxide Nanopowder and cobalt oxides (CoO and Co3O4) to prepare their nanoparticles. Nanoparticles of Co3O4 are promising materials for electronic devices, and laser ablation of Co3O4 has been carried out only in the gas phase. CoO is also an important material, for example, it is known as a gas sensing material.

Dr. Darren Chandler, Ph.D(Manchester Metropolitan University, U.K)
Cobalt Oxide Nanopowder can also be used in several military applications such as high-performance invisible materials for absorbing extremely high frequency (EHF) millimeter wave (MMW), visible light and infrared.
Dr. Ms. Cristiana Barzetti (University of Cagliari-Department of Chemical Engineering and Material Science, Italy)
Cobalt Oxide Nanopowder has been used in the manufacture of semi-conductors devices containing gold or platinum. Cobalt can be diffused through the substrate and then gold or platinum is diffused in at a temperature sufficient to replace the cobalt but somewhat lower than would otherwise be required.

Dr. Jang Huang, Ph.D (Shandong Science and Technology University, China)
Cobalt Oxide Nanopowder Li-ion battery contains by far the greatest amount of cobalt per cell. The cathode active material contains 60% cobalt rather than the 5-15% of Ni electrode cells and accounts for about 50% of the weight of the cathode.
Dr. Mark Brown (Georgia Institute of Technology in Atlanta,USA)
Cobalt Oxide Nanopowder, in the form of fine powder, oxide or hydroxide, is used as additive in these electrodes for the following reasons: It drastically improves the conductivity of the nickel electrode, It mechanically stabilises the electrode by inhibiting the formation of -NiOOH and reduces the rigidity of the nickel hydroxide deposit, It increases the potential for electrolyte decomposition.
Follow us:
Contact us:
Please feel free to send us your requirement about our products
sales@nanoshel.com
contact@nanoshel.com
+1 646 470 4911 (US)
+36 30 4750555 (EU)
+91-9779880077 (India)
Nanoshel’s Product Categories Link:
ZnSe/ZnS QDs WATER SOLUBLE, InP ZnS QDs SURFACE MODIFIED, CdS/ZnS QDs H2O SOLUBLE, PbS QDs SURFACE MODIFIED, ARSENIDES, LANTHANIDE NANOMATERIALS, TRANSITION METAL NANOMATERIALS, SPECIALITY CHEMICALS, MAGNETIC NANOPARTICLES, CUSTOM SYENTHESIS, METALIC FOAMS, SCREEN PRINTED BIO SENSOR, LITHIUM ION BATTERY MATERIAL, ITO COATED GLASS, POLYMERS NANO MATERIAL, NANO FABRIC COATINGS, METAL FOILS, PELLETS CHIPS METAL BALLS, WAFERS & TARGETS, SPUTTERING TARGETS, SINGLE CRYSTAL SUBSTRATES, PYROLITIC GRAPHITE, PROTECTIVE EQUIPMENTS, METAL CRUCIBLES, ALUMINA CERAMIC TILES, INORGANIC COMPOUNDS