Copper Shot (Cu, Purity: 99.9%, Size : 2-5 mm)

Highly Pure – Copper Shot

Product: Copper Shot (Cu, Purity: 99.9%, Size : 2-5 mm)

Quality Control: Each lot of NANOSHEL Copper Shot  was tested successfully.

Copper Shot

Copper Shot

 

Product Name Copper Shot
Stock No. NS6130-12-000035
CAS 7440-50-8 Confirm
Size 2-5 mm Confirm
Appearance Red-Orange Metallic Confirm
Molecular Formula Cu Confirm
Density 8.96 g/cm3 Confirm
Melting Point 1084.62 °C Confirm
Boiling Point 2562 °C Confirm
Thermal Expansion 16.5 µm/(m-1·K-1) at 25 °C Confirm
Thermal Conductivity 401 W/cm/K Confirm
Crystallographic Structure Face-Centered Cubic (fcc) Confirm
Available Quantities 25Gms, 50Gms, 100Gms and larger quantities
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Al ≤0.01 %
Mg ≤0.06 %
Mn ≤0.01 %
Cr ≤0.02 %
Ni ≤0.01 %
Si 0.005 %
Fe 0.05 %

 Experts Review:

Miller-(Christopher)-345x239Dr. Baron Augustin, Ph.D (TUM)(Technical University of Munich, Germany)
Metal balls are rolling, spherical elements that exhibit greater strength and toughness than plastic and ceramic balls. They have a sufficient hardness for many industrial ball applications, and most products are electrically conductive. Some steel, nickel, and cobalt balls can be magnetized. Metal balls made from certain alloys can also provide corrosion resistance and refractory resistance.


images (33)

Dr. Darren Chandler, Ph.D(Manchester Metropolitan University, U.K)
Copper Shot: 
Other applications for metal balls include proprietary, patented or specialty applications such as drilling equipment, hardness testers, swivel balls, pinball machine balls, weights, toys, bicycle parts, foosball balls, handles, knobs, skates, drawer slides, spacers, fillers, projectiles, marine parts, door locks, and coffee makers.


Wiggs

Dr. Ms. Cristiana Barzetti (University of Cagliari-Department of Chemical Engineering and Material Science, Italy)
Copper Shot: 
Metal chips are generally irregular shaped portions of metal fragments where the key to selection is the “available surface area.” Chips come in a variety of sizes and shapes which can range from being quite large (an inch or two in diameter to fractions of inches). Generally, the smaller the chips, the more surface area there is of the material being used.


jetsonlee

Dr. Jang Huang, Ph.D (Shandong Science and Technology University, China)
Copper Shot: 
Pellets have hollow bases (the skirt area of the pellet) that are generally larger in diameter than the front section (known as the head of the pellet). This enables the skirt to effectively seal the bore against the pressure pushing on the base of the pellet while the friction on the head area is not too high.


images (21)Dr. Mark Brown (Georgia Institute of Technology in Atlanta,USA)
Metal Balls for valve applications include products for check valves and ball valves, as well as trunnion, segment, stem, three-way, four-way, poly or multiple way, and two-piece balls. Valve balls must have a controlled sphericity and sufficient tolerances for proper sealing against the valve seat.


Copper Shot



Nanoshel’s Product Categories Link:

ORGANIC COMPOUNDS, METAL ORGANIC FRAMEWORKS, FEED GRADE ACTIVE PHARMACEUTICAL INGREDIENT, ORGANIC FLUORINE MATERIALS, NEW PRODUCTS, METAL MICRO POWDER, OXIDE MICRO POWDER, COMPOUND MICRO POWDER, ALLOY MICRO POWDER, CLAY POWDER, CARBON POWDER, 3D PRINTING POWDER, ULTRA HIGH TEMPERATURE CERAMICS NANOMATERIALS, ACETATES BORATES NANOMATERIALS, CARBIDES ALUMINATES NANOMATERIALS, CHLORIDES NANOMATERIALS, FLUORIDES NANOMATERIALS, NITRATES/SULPHIDES, SILICATES/TITANATES, STIMULATES/ALUMINATES NANOMATERIALS