DSP Silicon Wafer P Type (12″, Boron Doped)

Silicon Wafer P Type DSP

Product: DSP Silicon Wafer P Type (12″,Boron Doped)

Quality Control: Each lot of NANOSHEL DSP Silicon Wafer P Type was tested successfully.

Product Name DSP Silicon Wafer P Type
Product Code NS6130-10-1264
CAS 7440-21-3 Confirm
Diameter 12” (300±0.2mm) Confirm
Type P Type Confirm
Doping Boron Confirm
Crystal Orientation <100> Confirm
Notch Orientation <100> Confirm
Surface Double Side Polished Confirm
Thickness 775±25μm Confirm
Resistivity 1-100Ω/cm Confirm
Crystal method CZ Confirm
TTV ≦10µm Confirm
Bow ≦40µm Confirm
Warp ≦40µm Confirm
Particle ≦50 @ 0.20µm Confirm
Laser marks Backside T7+M12 Semi-Std Confirm
Impurity ≦1E10 Atoms/cm² Confirm
Main Inspect Verifier Manager QC

 Experts Review:

Dr. Henrik Jensen,Ph.D (Middle East Technical University Ankara, Turkey)
Silicon wafers are key component in integrated circuits. Integrated circuits are, simply put a composite of various electronic components that are arranged to perform a specific function. Silicon is the principle platform for semiconductor devices.  A wafer is a thin slice of the semiconductor material, which serves as the substrate for microelectronic devices built in and over the wafer.


Dr. Chiyoko Hayashi (Osaka University Suita, Japan)
As silicon wafer’s primary use is in integrated circuits. Integrated circuits power many of devices that can be used by society everyday. Computers and smartphones are just two of the devices that are dependent on this technology. Silicon is the stable among all the semiconductors. Other uses include sensors, such as the tire pressure sensor system and solar cells. Silicon wafers absorbs the photons in sunlight and this in turn create electricity.



Dr. Joris Smits, Ph.D (Wrocław University of Technology, Poland)
The wafers serves as the substrates for microelectronic devices built in and over the wafer and undergoes many microfabrication process steps such as doping or ion implantation, etching, deposition of various materials and photolithographic pattering.



Dr. Ms. Sally Adams (National Technical University of Athens)
Silicon wafers are available in a variety of diameters from 25.4mm (1 inch) to 300mm. The diameter has gradually increased to improve throughput and reduce cost with the current  state –of-the-art of fab considered to be 300mm with the next standard projected to be 450mm.



Dr. Peter Bruggmann (Technical University of Madrid, Spain)
Wafer thickness is determined by the mechanical strength of the material used the wafer must be thick enough to support its own weight without cracking during handling. Wafers are grown from crystals having a regular crystal structure, with silicon having a diamond cubic structure. Orientation is defined by the Miller index with (100) or (111) faces being the most common for silicon. Ion implantation depths depend on the wafer’s crystal orientation, since each direction offers distinct paths for transport.


DSP Silicon Wafer P Type

DSP Silicon Wafer P Type

free quote

Contact Us for DSP Silicon Wafer P Type 
From us, you can easily purchase Silicon Wafer P Type DSP at great prices. Place online order and we will dispatch your order through DHL, FedEx, UPS. You can also request for a quote by mailing us at sales@nanoshel.com Contact: +1 302 268 6163 (US and Europe), Contact: +91-9779550077 (India). We invite you to contact us for further information about our company and our capabilities. At Nanoshel, we could be glad to be of service to you. We look forward to your suggestions and feedback.


More Silicon Products By Nanoshel

NS6130-12-000017 – Ethyl Silicate (C2H6O3Si, Purity: 40.0%)

NS6130-10-1110 – Boron Doped P Type Silicon Wafer (4 inches, Single Side Polished)

NS6130-02-207 – Silicon Carbide Powder (SiC, Beta, 1-40µm adjustable, 99.9%)

NS6130-10-1184 – Silicon Wafer N Type SiO2 (4 inches, Single Side Polished)

NS6130-10-1121 – Heavily Doped Silicon Wafer (2 inches, N Type)

NS6130-10-1177 – Silicon Wafer Gold Coated (4 inches, Single Side Polished)

NS6130-10-1058 – Silicon Nitride Sputtering Target (Si3N4, Purity: 99.99%, Dia: 50±1mm)

NS6130-10-1178 – Silicon Wafer Silver Coated (4 inches, Single Side Polished)

NS6130-10-1204 – CZ Silicon Wafer (P Type, Boron Doped, 10mm)