For Purchase related inquiries, kindly mail us at,,

Home » EVA Foam Sheet (Ethylene Vinyl Acetate blended copolymers)


Stock No. CAS MSDS Specification COA
NS6130-10-1266 24937-78-8 MSDS pdf Specification pdf COA pdf

EVA Foam Sheet

(Ethylene Vinyl Acetate and blended copolymers)

EVA Foam Sheet

EVA Foam Sheet

Product EVA Foam Sheet
Stock No NS6130-10-1266
CAS 24937-78-8 Confirm
Purity >99.9% Confirm
Density 30 kg/m3 Confirm
Thermal Conductivity 0.038 W/mK Confirm
Compressive Strength 78 Kpa Confirm
Surface Hardness 40 °C Confirm
Tear Strength 0.35 N/mm m² Confirm
Tensile Strength 780 Kpa Confirm
Elongation at break 100 % Confirm
Compression deformation 25 % Confirm
Size Change Rate 0.8 % Confirm
Rebound Rate 26.00 % Confirm
Elongation 130 % Confirm
Service Temperature -30 to 180 °F Confirm
Adhesive Thickness 0.15 mm Confirm
Adhesive Weight 80 g/m³ Confirm
Adhension 18 N/25 mm Confirm
Application +10 °C min Confirm
Service -50~+100 °C Confirm
Short peak +120 °C Confirm
Storage 3 year Confirm
Conclusion The specifications Confirm with enterprise standard
Quality Control Each lot of EVA Foam Sheet was tested successfully.
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Assay >99.9%

Expert Reviews

Dr. Guowei Kwong, PhD(Ho Chi Minh City University of Science, Vietnam)

Foams are materials with a large amount of interfaces- free surfaces- with the potential to show radiation resistance due to ideally unsaturable sink strength represented by free surfaces. Nanocomposites, Nanophase materials, and Nanofoams could be unusually resistant to radiation because radiation-induced point defects cannot accumulate in the presence of the high density of defects sinks provided by interfaces and surfaces in these materials.

Dr. Marco Ferro, MD PhD(University of Nordland Bodø, Norway)

Foams are dipped into molten metal, then placed in a vacuum so that the air in the foam’s pores is removed and replaced by the alloy. The foam had pore sizes of about 2mm, that can be tuned to create a stiffer or more flexible materials. During testing of its strength material showed an ability to deform when heated above 144 degrees, regain rigidity when cooled, then return to its original shape and strength when reheated.

Dr. Ms. Huian Ruan, Taungoo Technological University, Myanmar

Amorphous metal foams are highly ductile in compression, and thus offer attractive compromises in mechanical and physical properties between crystalline metallic and ceramic foams. Metal foams have properties which make them suitable for automotive industry,  in ship building, aerospace industry and civil engineering.

EVA Foam Sheet

EVA Foam Sheet

*Exchanges of materials/products are not permitted. Nanoshel does not offer refunds.
*US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted