High Purity Ferromagnetic Carbon Nanotubes
Product: Ferromagnetic Carbon Nanotubes
Description: Sample purity of NANOSHEL Ferromagnetic Carbon Nanotubes (MWNT 99% Dia:20-30nm Length:30-40um) is 80-98 Vol%, as determined by Raman Spectrophotometer and SEM Analysis. Nanoshel Nano material contains no residual catalyst impurities. Tubes occur in bundles of length ~1 – 20μm (±1.5μm). Individual tube length has not been determined.
|Materials||Ferromagnetic Carbon Nanotubes|
|Residue ( calcination in air)||<1%||Confirm|
|Average interlayer distance||0.34nm||Confirm|
|Special surface area||90-350* m²/g||Confirm|
|Bulk density||0.05-0.17 g/cm³||Confirm|
|Real density||1-2 g/cm³||Confirm|
|Charging *||2180 (Capacity: mA h/g)||Confirm|
|Discharging*||534 (Capacity: mA h/g)||Confirm|
|Volume Resistivity||0.1-0.15 Ω.cm ( measured at pressure in powder)||Confirm|
|Available Quantities||10Gms, 25Gms, 50Gms, 100Gms and larger quantites|
|Main Inspect Verifier||Manager QC|
Dr. Ms. Kelley Johnson, Ph.D (Adam Mickiewicz University in Poznań, Poland)
Multi walled carbon nanotubes consists of multiple rolled layers (concentric tubes) of graphite. Their diameter is 3-30 nm and they can grow various cm long, thus their aspect ratio can vary between 10 and ten million. MWCNT have Russian –doll Structure, rigidity, smaller outer diameter, different wall structure, and hollow interior.
Dr. Richard Harper, Ph.D (National Polytechnic Institute (IPN), Mexico)
MWNTs are highly conductive when properly integrated into a composite structure. The outer wall alone is conducting, the inner walls are not significant to conductivity. MWNTs have a high aspect ratio with lengths typically more than 100 times the diameter, and much higher. Their performance and application is based not just on aspect ratio, but also on the degree of entanglement and the straightness of the tubes, which in turn is a function of the both the degree and dimension of defects in the tubes.
Dr. Juan Yang (Seoul National University Seoul, South Korea)
MWNTs with no defects have an excellent tensile strength and when integrated into a composite, such as a thermoplastic or thermoset compounds, can significantly increase its strength. MWNTs have a thermal stability more than 600 °C, based on the level of defects and to certain extent on the purity as residual catalyst in the product can also catalyze decomposition.
Dr. Steve Chesney, Ph.D (Ludwig Maximilian University of Munich,Germany)
MWNTs are an allotrope of sp2 hybridized carbon similar to graphite and fullerenes and as such have high chemical stability. To enhance the both Strength and dispersibility of composites one can functionalize the nanotubes.
Dr. Ms. Mia Liao (National Taipei University of Technology, Taiwan)
MWNTs are suitable for various applications due to its high conductivity and high aspect ratio. The needed conductivity level can be achieved with much lesser loadings than for conventional solutions such as metal particulates or carbon black. Applications are: electrostatic discharge protection in wafer processing fabrication, antistatic elastomeric and plastic components for automobile fuel line components, plastics rendered conductive to enable electrostatic spray painting of automobile body parts, RFI shielding materials, etc.
Please feel free to send us your requirement about our products
+1 646 470 4911 (US)
+36 30 4750555 (EU)
Nanoshel’s Product Categories Link:
METAL NANOPOWDERS, COMPOUND NANOPOWDERS, OXIDE NANOPOWDERS, ALLOY NANOPOWDERS, CLAY NANOPOWDERS, GRAPHENE NANOPOWDERS, METAL NANOWIRES & NANORODS, DOPED NANOPOWDERS, SINGLE WALL CNT, MULTI WALL CNT, DOUBLE WALL CNT, FUNCTIONALIZED SWCNT, FUNCTIONALIZED MWCNT, INDUSTRIAL MWCNT, CARBON NANOTUBE ARRAY, METAL NANO DISPERSIONS, OXIDE NANO DISPERSIONS, CNT GRAPHENE DISPERSION, BIO NANO CONJUGATE SERVISES, POSS, CORE SHELL NANOPARTICLES, ZnSE/ZnS QUANTUM DOTS, InP/ZnS QUANTUM DOTS, CdS/ZnS QUANTUM DOTS, CdSe/ZnS QUANTUM DOTS, UPCONVERTING NANOPARTICLES, PbS QUANTUM DOTS