Fly Ash Nano Powder (APS: <100nm, Purity: 99.9%)

Fly Ash Nano Powder

Product: Fly Ash nano Powder (APS: <100nm, Purity: 99.9%)

Quality Control: Each lot of Fly Ash Nano Powder was tested successfully.

Fly Ash Nanoparticles

Fly Ash Nano powder

Product Name Fly Ash Nano Powder
Stock No. NS6130-12-000053
CAS 68131-74-8 Confirm
APS <100nm Confirm
Purity 99.9% Confirm
Physical State Powder Confirm
Color Gray-Black Confirm
Specific gravity 2-2.9 Confirm
Boiling Point >1000°C Confirm
pH 4-12 Confirm
Solubility Slightly soluble (< 5%)
Main Inspect Verifier Manager QC

Typical Chemical Analysis

SiO2 100ppm
Al2O3 30ppm
Fe2O3 10ppm
SO3 10ppm
TiO2 5ppm
Na2O 10ppm
K2O 5ppm
Mg 10ppm
Magnesia 5ppm
Na2O 5ppm
All Other Metal <150ppm

 Experts Review:

101Dr. jim Duncan, Ph.D (Norwegian University of Science and Technology Trondheim, Norway)
Nanoclays are nanoparticles of layered mineral silicates.  Depending on chemical composition and nanoparticle morphology, nanoclays are organized into several classes such as Montmorillonite, Bentonite, Kaolinite, Hectorite, and Halloysite. Clay minerals are hydrous silicates and may simply be described as fine-grained particles with sheet like structure stacked over one another.


102Dr. Mauritz Backman, Ph.D (Technical University of Lisbon (UTL), Portugal)
Nanoclay is used in ink formulation. It helps to adjust the consistency of printing inks to the desired value, avoiding pigment sedimentation, providing good colour distribution, obtaining desired film thickness etc. by incorporation of small amount of organically modified layered silicate. The performance of cosmetics is enhanced by use of nanoclay and they allows good colour renention for lipsticks, eye shadows and nail lacquers.


103Dr. Lounis Madani (University of Abou Bekr Belkaïd, Algeria)
The nanometer sized Montmorillonite clay particles can improve surface integrity and provide advantages in the mechanical and thermal properties of the composites. The interaction between nanoclay and surrounding matrix even though high tensile strength and modulus were obtained.


104Dr. Eric Lin, Ph.D (Sukhothai Thammathirat Open University (STOU) Nonthaburi,Thailand)
The use of nanoclays in water waste treatment has become common in industry today. Nanoclay exhibit a synergistic effect with many commonly utilized water treatment unit processes  including granular activated charcoal, reverse osmosis and air strippers. Granular activated carbon is particularly effective at removing a large range of organic molecules from water. Nanoclay have proven to be the technology of choice for treating oily wastewaters.


105Dr. Robert Wing, Jr. (University of British Columbia, Canada)
Nanoclay as drug vehicle:  Nanoclay as drug vehicle for controlled release of drug is one of the born age area in medical application, nanoclay have great potential as compared to polymer and carbon nano tubes for drug delivery applications.


Fly Ash Nano Powder

Fly Ash Nano Powder


Contact Us:

Please feel free to send us your requirement about our products
sales@nanoshel.com
 contact@nanoshel.com
+1 646 470 4911 (US)
+36 30 4750555 (EU)
+91-9779880077 (India)


Nanoshel’s Most Moving Products:

NS6130-01-101 – Silver (Ag) Nanoparticles / Nanopowder (Ag, 99.99%, 80-100 nm, metal basis)

NS6130-01-105 – Aluminium Nanoparticles/Nanopowder (Al, 99.9%, APS: 100nm, Metal basis)

NS6130-01-128 – Copper Nanoparticles/Nanopowder (Cu, Purity: 99.9%, APS: 80-100nm, Metal Basis)

NS6130-01-108 – Gold (Au) Nanopowder (Au, 99.99+%, 50-100 nm)

NS6130-02-219 – Antimony Tin Oxide Nanoparticles (ATO, SnO2:Sb2O3=90:10, 99.8%, 30nm)

NS6130-03-301 – Aluminium Oxide Nanopowder (Al2O3, 99.99%, <100nm)

NS6130-03-341 – Silicon Oxide Nanopowder (SiO2, S-type, Purity: 99.9%, APS: 15-20nm)

NS6130-03-350 – Titanium Oxide Nanopowder (TiO2, Anatase, 99.9%, 10-25nm)

NS6130-10-1002 – P Type Silicon Wafer (4″ Boron Doping)

NS6130-03-341 – SiO2 Nanoparticles (Silicon Dioxide, 15-20nm, 99.9%, S-type)

NS6130-10-1007 – Metallic Copper Foamposite (Cu, PPI-50PPI, Thickness; 2mm)

NS6130-10-1052 – Titanium Sputtering Target (Ti, Purity: 99.99%)

NS6130-10-1214 – Aluminium Metal Foam (Al, Closed Cell, 2-11mm)

NS6130-10-1233 – Screen Printed Electrodes (3-electrodes)

NS6130-06-640 – Pristine MWCNT (99%, OD:10-20nm, Length:3-8μm)

NS6130-06-601 – Single Walled Carbon Nanotubes (>98wt% OD:1-2nm, Length:3-8µm, High Purity)

NS6130-06-680 – Industrial Grade Carbon Nanotubes in bulk quantities

NS6130-06-659 – COOH Functionalized CNT (Carbon Nanotubes, OD: 10-20nm, Length: 3-8µm)

NS6130-03-364 – Single Layer Graphene (C, >50%, Thickness 0.5-6nm, Lateral Size 1-10µm)

NS6130-03-365 – Multilayer Graphene (C, 4-6 Layer Flakes, >80%, 1-10µm)

NS6130-06-659 – COOH Functionalized CNT (Carbon Nanotubes, OD: 10-20nm, Length: 3-8µm)

NS6130-09-907 – Montmorillonite (Natural montmorillonite Modified, >99%, <80nm)