Home » Lithium Titanate Oxide Powder (Li4Ti5O12,Purity: >99%, APS: 1.5 – 3 µm )


Stock No. CAS MSDS Specification COA
NS6130-12-000318 12031-82-2 MSDS pdf Specification pdf COA pdf

Lithium Titanate Oxide Powder

Lithium Titanate Oxide Powder (Li4Ti5O12,Purity: >99%, APS: 1.5 – 3 µm )


SEM - Lithium Titanate Oxide Powder

SEM - Lithium Titanate Oxide Powder

Product Lithium Titanate Oxide Powder
Stock No NS6130-12-000318
CAS 12031-95-7 Confirm
Purity > 99% Confirm
APS 1.5 – 3 µm Confirm
Linear Formula Li4Ti5O12 Confirm
Color White Confirm
Tap Density 1.1 – 1.5 g/cm3 Confirm
Specific Surface Area 5 – 9 m2/g Confirm
Grain Size 50 – 90 nm Confirm
Crystal Structure Spinel, cubic, Fd-3m Confirm
Crystal Density 3.485 g/cm3 Confirm
Stable Temperature Range Up to 700°C Confirm
Nominal voltage vs. Li/Li+ 1.53V Confirm
Minimum Capacity 150 mAh/g Confirm
Nominal capacity at 0.1C ≥ 170 mAh/g Confirm
Recommended maximum charge voltage 3.0V vs. Li/Li+ Confirm
Recommended maximum charge current 5C Confirm
Recommended cutoff voltage for discharge 1.0V vs. Li/Li+ Confirm
Recommended maximum discharge current 10C Confirm
Quality Control Each lot of Lithium Titanate Oxide Powder was tested successfully.
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Purity >99%
Other Metal 7500ppm

Expert Reviews

Dr. Bruce Perrault, Ph.D (Georgia Institute of Technology (Georgia Tech), USA)

Lithium–ion batteries seem to be everywhere these days. They power most of the electronic devices we carry around with us such as- Consumer Gadgets, Electric Cars, Cell phones, Digital cameras, MP3 Players, Laptops and so on. Due to their good energy-to-weight ratio, lithium batteries are some of the most energetic rechargeable batteries available today. They get their name from lithium ion that moves from the anode to the cathode during discharge and from cathode to anode during recharging.

Dr. Ms. Yi Yen Shi, (King Mongkut’s University of Technology Thonburi,Bangkok, Thailand)

Space and military sectors use Lithium-ion batteries as portable power sources and in future, spacecraft like James Webb Space Telescope are expected to use lithium-ion batteries. The main reason for this rapid domination of lithium-ion battery technology in various sector is the highest storage capacity with respect to its weight.

Dr. Myron Rubenstein, Ph.D (Polytechnic University of Turin, Italy)

Lithium-ion batteries are suitable for applications where both high energy density and power density are required, and they are superior to other types of rechargeable batteries such as lead-acid, nickel-cadmium, nickel-metal hydride etc. due to following aspects: (1) store more energy and deliver higher power for longer duration of time (2) get charged in shorter period of time (3) have a longer life time (4) be resistant to fire hazards.

Dr. Huojin Chan, (University of Science and Technology of China, Hefei, Anhui, China)

Now a days there is a great deal of interest to upgrade the exisiting LIBs with improved properties & a battery technology that would permit smart storage of electric energy. With the avident of next generation LIBs, electric vehicles are expected to cover longer distances with shorter charging time, mobile phones and laptops are expected to be charged within minutes and last longer.

Dr. Hans Roelofs, Ph.D (National Technical University of Athens, Greece)

Nanotechnology has the potential to deliver the next generation batteries, especially lithium-ion batteries, with improved performance, durability and safety at an acceptable cost. A typical lithium-ion battery consists of three main components: an anode made of (mainly graphene and other conductive additives), a cathode (generally a layered transition metal oxide) and electrolyte through which lithium ions shuttles between the cathode and anode during charging and discharging cycles.

Lithium Titanate Oxide Powder

Lithium Titanate Oxide Powder

*Exchanges of materials/products are not permitted. Nanoshel does not offer refunds.
*US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted