Home » Magnesium Chip (Mg, Purity: 99.9%, Size : 2.5 mm)

PELLETS CHIPS & METAL BALLS

Stock No. CAS MSDS Specification COA
NS6130-12-000028 7439-95-4 Specification pdf COA pdf

Magnesium Chip (Mg, Purity: 99.9%, Size : 2.5 mm)

Highly Pure - Magnesium Chip

Magnesium Chip (Mg, Purity: 99.9%, Size : 2.5 mm)

Quality Control: Each lot of NANOSHEL Mg, Purity: 99.9%, Size : 2.5 mm was tested successfully.

Magnesium Chip

Magnesium Chip

 
Product Name Magnesium Chip
Stock No. NS6130-12-000028
CAS 7439-95-4 Confirm
APS 2.5 mm Confirm
Molecular Formula Mg Confirm
Form Shiny Grey Powder Confirm
Melting Point 650 °C Confirm
Boiling Point 1091 °C Confirm
Density 1.738 g/cm³ Confirm
Thermal Expansion 24.8µm/(m-K) at 25 °C Confirm
Thermal Conductivity 156 W/(m-K) Confirm
Electrical Resistivity 43.9 nΩ-m (at 25 °C) Confirm
Crystallographic Structure Hexagonal Close-Packed Confirm
Available Quantities 25Gms, 50Gms, 100Gms and larger quantities
Main Inspect Verifier Manager QC

Expert Reviews

Dr. Mark Brown
Dr. Mark Brown, (Georgia Institute of Technology in Atlanta,USA)

Metal balls are rolling, spherical elements that exhibit greater strength and toughness than plastic and ceramic balls. They have a sufficient hardness for many industrial ball applications, and most products are electrically conductive. Some steel, nickel, and cobalt balls can be magnetized. Metal balls made from certain alloys can also provide corrosion resistance and refractory resistance.


Dr. Darren Chandler
Dr. Darren Chandler, Ph.D(Manchester Metropolitan University, U.K)

Magnesium Chip: Other applications for metal balls include proprietary, patented or specialty applications such as drilling equipment, hardness testers, swivel balls, pinball machine balls, weights, toys, bicycle parts, foosball balls, handles, knobs, skates, drawer slides, spacers, fillers, projectiles, marine parts, door locks, and coffee makers.


Dr. Jang Huang
Dr. Jang Huang, Ph.D (Shandong Science and Technology University, China)

Metal chips are generally irregular shaped portions of metal fragments where the key to selection is the “available surface area.” Chips come in a variety of sizes and shapes which can range from being quite large (an inch or two in diameter to fractions of inches). Generally, the smaller the chips, the more surface area there is of the material being used.


Dr. Ms. Cristiana Barzetti
Dr. Ms. Cristiana Barzetti,  (University of Cagliari-Department of Chemical Engineering and Material Science, Italy)

Magnesium Chip: Pellets have hollow bases (the skirt area of the pellet) that are generally larger in diameter than the front section (known as the head of the pellet). This enables the skirt to effectively seal the bore against the pressure pushing on the base of the pellet while the friction on the head area is not too high.


Dr. Baron Augustin
Dr. Baron Augustin, Ph.D (TUM)(Technical University of Munich, Germany)

Magnesium Chip: Metal Balls for valve applications include products for check valves and ball valves, as well as trunnion, segment, stem, three-way, four-way, poly or multiple way, and two-piece balls. Valve balls must have a controlled sphericity and sufficient tolerances for proper sealing against the valve seat.


Magnesium Chip

Magnesium Chip