Home » Magnesium Oxide Single Crystal Substrates (MgO, Purity: >99.95%, Size: 10×10mm, L: 1mm)

SINGLE CRYSTAL SUBSTRATES

Stock No. CAS MSDS Specification COA
NS6130-10-1220 1309-48-4 Specification pdf COA pdf

Magnesium Oxide Single Crystal Substrates (MgO, Purity: >99.95%, Size: 10×10mm, L: 1mm)

Magnesium Oxide Single Crystal Substrates

Product : Magnesium Oxide Single Crystal Substrates (MgO, Purity: >99.95%, Size: 10×10mm, L: 1mm)

Quality Control: Each lot of NANOSHEL MgO, Purity: >99.95%, Size: 10×10mm, L: 1mm was tested successfully.

 
Product Name MgO Single Crystal Substrate
Stock No NS6130-10-1220
CAS 1309-48-4 Confirm
Length 10mm Confirm
Width 10mm Confirm
Thickness 1mm Confirm
Density 3.58g/cm³ Confirm
Thermal Expansion 12.8×10-6/°C Confirm
Growth Method Special Arc Melting Confirm
Crystal Structure cube a=4.216 Angstrom (1 Angstrom =10-10m) Confirm
Crystal cleavage plane <100> Confirm
Melting Point 2852 °C Confirm
Typical Purity >99.95% Confirm
Chamfer Double sides, protective chamfer Confirm
Crystal Purity >99.95% Confirm
Decompose constant 9.8 Confirm
Optical Transmission >90% @200-400nm >98%500-1000nm Confirm
Polished surface roughness (Ra) ≤ 1nm Confirm
Surface Treatment Double sides Confirm
Main Inspect Verifier Manager QC

Expert Reviews

Dr. Clive Patterson Ph.D
Dr. Clive Patterson Ph.D , (Moscow Institute of Physics and Technology, Russia)

A single Crystal is a material in which the crystal lattice of the entire sample is continuous and unbroken to the edges of the sample, with no grain boundaries. The absence of the defects associated with grain boundaries can give single crystals unique properties, particularly optical, electrical, and mechanical. These properties, in addition to making them precious in some gems, are industrially used in technological applications, specially in optics and electronics.


Dr. Ms. Teresa B.
Dr. Ms. Teresa B. , (University of San Carlos, Philippines)

Single Crystal substrates has a unique combination of physical, chemical and optical properties allowing it to withstand high temperatures, high pressures, thermal stock and water or soil erosion. It is chemically inert with a low friction coefficient and excellent electrical, optical and dielectric characteristics.


Dr. Stew Dean Ph.D
Dr. Stew Dean Ph.D , (University of Technology Sydney, Australia)

Single crystal substrateshas been widely used as substrate material for the deposition of high quality oxide thin films, including semiconducting, superconducting, dielectric, ferroelectric, and ferromagnetic oxides. The quality of the oxide films is strongly correlated to the quality of the substrate.


Dr. Ms. Yi Yen Shi,
Dr. Ms. Yi Yen Shi,, (King Mongkut’s University of Technology Thonburi,Bangkok, Thailand)

The anistropicproperties of crystals depends on the orientation of crystals and lead to a wide range of applications in research and development. Crystal substrates has hexagonal/rhombohedral structure. For epitaxial growth of films, different orientations will offer a range of lattice constants to match the epi material.


Dr. Myron Rubenstein,
Dr. Myron Rubenstein,, Ph.D (Polytechnic University of Turin, Italy)

Single crystal substrates are of three types: C-plane, A-plane, R-plane.

C-plane substrates are used to grow III-V and II-VI compounds such as GaN for blue LED and laser diodes. A-plane substrate provide a uniform dielectric constant and high insulation for hybrid microelectronics applications. R-plane substrates are used for the hetero-epitaxial deposition of silicon for microelectronic IC applications.


MgO Single Crystal Substrate

MgO Single Crystal Substrate