Home » Manganese Chips (Mn, Purity: 99.9%, Size : 2.5 mm)


Stock No. CAS MSDS Specification COA
NS6130-12-000029 7439-96-5 MSDS pdf Specification pdf

Manganese Chips

Manganese Chips (Mn, Purity: 99.9%, Size : 2.5 mm)


Manganese Chips

Manganese Chips

Product Manganese Chips
Stock No. NS6130-12-000029
CAS 7439-96-5 Confirm
APS 2.5 mm Confirm
Molecular Formula Mn Confirm
Color Silvery Metallic Confirm
Density 7.21 g/cm³ Confirm
Melting Point 1246 °C Confirm
Boiling Point 2061 °C Confirm
Thermal Expansion 21.7 µm/(m·K) (at 25 °C) Confirm
Thermal Conductivity 7.81 W/(m·K) Confirm
Crystallographic Structure Body-Centered Cubic Confirm
Available Quantities 25Gms, 50Gms, 100Gms and larger quantities
Quality Control Each lot of Manganese Chips was tested successfully.
Main Inspect Verifier Manager QC

Expert Reviews

Dr. Mark Brown, (Georgia Institute of Technology in Atlanta,USA)

Manganese Chips: Metal balls are rolling, spherical elements that exhibit greater strength and toughness than plastic and ceramic balls. They have a sufficient hardness for many industrial ball applications, and most products are electrically conductive. Some steel, nickel, and cobalt balls can be magnetized. Metal balls made from certain alloys can also provide corrosion resistance and refractory resistance.

Dr. Darren Chandler, Ph.D(Manchester Metropolitan University, U.K)

Manganese Chips: Other applications for metal balls include proprietary, patented or specialty applications such as drilling equipment, hardness testers, swivel balls, pinball machine balls, weights, toys, bicycle parts, foosball balls, handles, knobs, skates, drawer slides, spacers, fillers, projectiles, marine parts, door locks, and coffee makers.

Dr. Jang Huang, Ph.D (Shandong Science and Technology University, China)

Metal chips are generally irregular shaped portions of metal fragments where the key to selection is the “available surface area.” Chips come in a variety of sizes and shapes which can range from being quite large (an inch or two in diameter to fractions of inches). Generally, the smaller the chips, the more surface area there is of the material being used.

Dr. Ms. Cristiana Barzetti,  (University of Cagliari-Department of Chemical Engineering and Material Science, Italy)

Pellets have hollow bases (the skirt area of the pellet) that are generally larger in diameter than the front section (known as the head of the pellet). This enables the skirt to effectively seal the bore against the pressure pushing on the base of the pellet while the friction on the head area is not too high.

Dr. Baron Augustin, Ph.D (TUM)(Technical University of Munich, Germany)

Metal Balls for valve applications include products for check valves and ball valves, as well as trunnion, segment, stem, three-way, four-way, poly or multiple way, and two-piece balls. Valve balls must have a controlled sphericity and sufficient tolerances for proper sealing against the valve seat.

Manganese Chips

Manganese Chips

*Exchanges of materials/products are not permitted. Nanoshel does not offer refunds.
*US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted