Home » Manganese Metal Pieces (Mn, Purity: 99.9%, APS: 5mm-15mm)


Stock No. CAS MSDS Specification COA
NS6130-10-1063 7439-96-5 MSDS pdf Specification pdf COA pdf

Manganese Metal Pieces

Manganese Metal Pieces (Mn, Purity: 99.9%, APS: 5mm-15mm)


Product Manganese Metal Pieces
Stock No. NS6130-10-1063
CAS 7439-96-5 Confirm
Purity 99.9% Confirm
APS 5-15mm Confirm
Molecular Formula Mn Confirm
Molecular Weight 54.94 g/mole Confirm
Color Grayish/Silvery Confirm
Density 7.21g/cm³ Confirm
Melting Point 1244 °C Confirm
Boiling Point 1962 °C Confirm
Thermal Expansion 21.7 µm·m-1·K-1 Confirm
Thermal Conductivity 0.0781 W/cm/K @ 298.2 K Confirm
Quality Control Each lot of Manganese Metal Pieces was tested successfully.
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Assay 99.9%
Other Metal 1000ppm

Expert Reviews

Dr. Mark Brown, (Georgia Institute of Technology in Atlanta,USA)

Manganese Metal Pieces: Metal balls are rolling, spherical elements that exhibit greater strength and toughness than plastic and ceramic balls. They have a sufficient hardness for many industrial ball applications, and most products are electrically conductive. Some steel, nickel, and cobalt balls can be magnetized. Metal balls made from certain alloys can also provide corrosion resistance and refractory resistance.

Dr. Darren Chandler, Ph.D(Manchester Metropolitan University, U.K)

Other applications for metal balls include proprietary, patented or specialty applications such as drilling equipment, hardness testers, swivel balls, pinball machine balls, weights, toys, bicycle parts, foosball balls, handles, knobs, skates, drawer slides, spacers, fillers, projectiles, marine parts, door locks, and coffee makers.

Dr. Jang Huang, Ph.D (Shandong Science and Technology University, China)

Metal chips are generally irregular shaped portions of metal fragments where the key to selection is the “available surface area.” Chips come in a variety of sizes and shapes which can range from being quite large (an inch or two in diameter to fractions of inches). Generally, the smaller the chips, the more surface area there is of the material being used.

Dr. Ms. Cristiana Barzetti,  (University of Cagliari-Department of Chemical Engineering and Material Science, Italy)

Manganese Metal Pieces: Pellets have hollow bases (the skirt area of the pellet) that are generally larger in diameter than the front section (known as the head of the pellet). This enables the skirt to effectively seal the bore against the pressure pushing on the base of the pellet while the friction on the head area is not too high.

Dr. Baron Augustin, Ph.D (TUM)(Technical University of Munich, Germany)

Manganese Metal Pieces: Metal Balls for valve applications include products for check valves and ball valves, as well as trunnion, segment, stem, three-way, four-way, poly or multiple way, and two-piece balls. Valve balls must have a controlled sphericity and sufficient tolerances for proper sealing against the valve seat.

Manganese Metal Pieces

Manganese Metal Pieces

*Exchanges of materials/products are not permitted. Nanoshel does not offer refunds.
*US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted