Mica Powder (Purity: >98%, APS: 40-60µm)

Mica Powder

Product: Mica Powder (Purity: >98%, APS: 40-60µm)

Quality Control: Each lot of Mica Powder was tested successfully.

Mica Powder

Particles Size Analysis – Mica Powder

Product Mica Powder
Stock No. NS6130-10-000085
CAS 12001-26-2 Confirm
APS 40-60µm Confirm
Purity >98% Confirm
Appearance White / of-white powder Confirm
Specific Gravity 2.80 gm/cm³ Confirm
pH 650 °C Confirm
Moh’s Hardness 2.5 Confirm
Elastic Coefficient (1475.9-2092.7)×106Pa Confirm
Transparency 71.7-87.5% Confirm
Melting Point 1250 °C Confirm
Disruptive Strength 146.5KV/mm Confirm
Loss on ignition 3.98% Confirm
Refractive index 1.571.59 Confirm
Oil absorption 54.93ml/100gm Confirm
Solubility Insoluble in water
Main Inspect Verifier Manager QC

Typical Chemical Analysis

SiO2 500ppm
Al2O3 500ppm
K2O 300ppm
Na2O 100ppm
MgO 500ppm
CaO 500ppm
CaO 500ppm
Fe2O3 All Other Metal 500ppm

 Experts Review:

101Dr. jim Duncan, Ph.D (Norwegian University of Science and Technology Trondheim, Norway)
Clay minerals are typically formed by the gradual chemical weathering of rocks, usually silicate-bearing, by low concentrations of carbonic acid and other diluted solvents. Since ancient times, clay minerals have been investigated because of their importance in agriculture, ceramics, building and other uses.


102Dr. Mauritz Backman, Ph.D (Technical University of Lisbon (UTL), Portugal)
Clays are hydrous alumino-silicates broadly defined as those minerals that make up the colloid fraction of soils, sediments, rocks, and water and may be composed of mixtures of fine grained clay minerals and clay-sized crystals of other minerals such as quartz, carbonate, and metal oxides. Clays play an important role in the environment by acting as a natural scavenger of pollutants by taking up cations and anions either through ion exchange or adsorption or both. Thus, clays invariably contain exchangeable cations and anions held to the surface.


103Dr. Lounis Madani (University of Abou Bekr Belkaïd, Algeria)
Clays are act as excellent adsorbant materials due to Large specific surface area, chemical and mechanical stability, layered structure, and high cation exchange capacity (CEC). Clays and modified clays have been found particularly useful for adsorption of heavy metals.


104Dr. Eric Lin, Ph.D (Sukhothai Thammathirat Open University (STOU) Nonthaburi,Thailand)
Different minerals clays have been used as fillers for preparing hydrogel composites, including Kaolinite, Bentonite, Montmorillonite. Clay is one of the oldest building materials on Earth, among the naturally-occurring geologic materials such as stone and organic materials like wood. Clay is used to create adobe, cob, cordwood, and rammed earth structures and building elements such as wattle and daub, clay plaster, clay renderd, clay paints and ceramic building materials.


105Dr. Robert Wing, Jr. (University of British Columbia, Canada)
Due to their specific properties, e.g., high capillarity, unique rheological properties, hardening, plasticity, thixotropy, high degree of swelling, clays are widely used in various industries. Because of their excellent colloidal properties clays are often used as drilling fluids for oil and gas wells as well as other boreholes to lubricate and cool the cutting tools, to remove cuttings, and help prevent blowouts. One of the important properties of clays is adsorption and ability to interact with the metal ions from the surrounding environment.


Mica Powder

Mica Powder

 


Contact Us:

Please feel free to send us your requirement about our products
sales@nanoshel.com
 contact@nanoshel.com
+1 646 470 4911 (US)
+36 30 4750555 (EU)
+91-9779880077 (India)


Nanoshel’s Most Moving Products:

NS6130-01-101 – Silver (Ag) Nanoparticles / Nanopowder (Ag, 99.99%, 80-100 nm, metal basis)

NS6130-01-105 – Aluminium Nanoparticles/Nanopowder (Al, 99.9%, APS: 100nm, Metal basis)

NS6130-01-128 – Copper Nanoparticles/Nanopowder (Cu, Purity: 99.9%, APS: 80-100nm, Metal Basis)

NS6130-01-108 – Gold (Au) Nanopowder (Au, 99.99+%, 50-100 nm)

NS6130-02-219 – Antimony Tin Oxide Nanoparticles (ATO, SnO2:Sb2O3=90:10, 99.8%, 30nm)

NS6130-03-301 – Aluminium Oxide Nanopowder (Al2O3, 99.99%, <100nm)

NS6130-03-341 – Silicon Oxide Nanopowder (SiO2, S-type, Purity: 99.9%, APS: 15-20nm)

NS6130-03-350 – Titanium Oxide Nanopowder (TiO2, Anatase, 99.9%, 10-25nm)

NS6130-10-1002 – P Type Silicon Wafer (4″ Boron Doping)

NS6130-03-341 – SiO2 Nanoparticles (Silicon Dioxide, 15-20nm, 99.9%, S-type)

NS6130-10-1007 – Metallic Copper Foamposite (Cu, PPI-50PPI, Thickness; 2mm)

NS6130-10-1052 – Titanium Sputtering Target (Ti, Purity: 99.99%)

NS6130-10-1214 – Aluminium Metal Foam (Al, Closed Cell, 2-11mm)

NS6130-10-1233 – Screen Printed Electrodes (3-electrodes)

NS6130-06-640 – Pristine MWCNT (99%, OD:10-20nm, Length:3-8μm)

NS6130-06-601 – Single Walled Carbon Nanotubes (>98wt% OD:1-2nm, Length:3-8µm, High Purity)

NS6130-06-680 – Industrial Grade Carbon Nanotubes in bulk quantities

NS6130-06-659 – COOH Functionalized CNT (Carbon Nanotubes, OD: 10-20nm, Length: 3-8µm)

NS6130-03-364 – Single Layer Graphene (C, >50%, Thickness 0.5-6nm, Lateral Size 1-10µm)

NS6130-03-365 – Multilayer Graphene (C, 4-6 Layer Flakes, >80%, 1-10µm)

NS6130-06-659 – COOH Functionalized CNT (Carbon Nanotubes, OD: 10-20nm, Length: 3-8µm)

NS6130-09-907 – Montmorillonite (Natural montmorillonite Modified, >99%, <80nm)