Phosphorus Doped Silicon Wafer (2 inch, N Type)

Phosphorus Doped Silicon

Product: Phosphorus Doped Silicon

Phosphorus Doped Silicon

Product Name Phosphorus Doped Silicon Wafer
Product Code NS6130-10-1084
CAS 7440-21-3 Confirm
Diameter (mm) 2” (50.8mm) Confirm
Thickness 275μm Confirm
Doping Phosphorus Confirm
Crystal Orientation <100> Confirm
Type N Type Confirm
Growth Method CZ Confirm
Resistivity 1.0-5.0Ω.cm Confirm
TTV <10.0μm Confirm
STIR <2μm Confirm
Global Tir <5μm Confirm
Bow <50.0μm Confirm
Warp <50.0μm Confirm
LPD <30 counts @ particles size>0.3 μm Confirm
Laser mark None Confirm
Edge Profile Rounded Confirm
Front Surface Polished Confirm
Back Surface Etched Confirm
Main Inspect Verifier Manager QC

 Experts Review:

Dr. Henrik Jensen,Ph.D (Middle East Technical University Ankara, Turkey)
Silicon wafers are key component in integrated circuits. Integrated circuits are, simply put a composite of various electronic components that are arranged to perform a specific function. Silicon is the principle platform for semiconductor devices.  A wafer is a thin slice of the semiconductor material, which serves as the substrate for microelectronic devices built in and over the wafer.


Dr. Chiyoko Hayashi (Osaka University Suita, Japan)
As silicon wafer’s primary use is in integrated circuits. Integrated circuits power many of devices that can be used by society everyday. Computers and smartphones are just two of the devices that are dependent on this technology. Silicon is the stable among all the semiconductors. Other uses include sensors, such as the tire pressure sensor system and solar cells. Silicon wafers absorbs the photons in sunlight and this in turn create electricity.



Dr. Joris Smits, Ph.D (Wrocław University of Technology, Poland)
The wafers serves as the substrates for microelectronic devices built in and over the wafer and undergoes many microfabrication process steps such as doping or ion implantation, etching, deposition of various materials and photolithographic pattering.



Dr. Ms. Sally Adams (National Technical University of Athens)
Silicon wafers are available in a variety of diameters from 25.4mm (1 inch) to 300mm. The diameter has gradually increased to improve throughput and reduce cost with the current  state –of-the-art of fab considered to be 300mm with the next standard projected to be 450mm.



Dr. Peter Bruggmann (Technical University of Madrid, Spain)
Wafer thickness is determined by the mechanical strength of the material used the wafer must be thick enough to support its own weight without cracking during handling. Wafers are grown from crystals having a regular crystal structure, with silicon having a diamond cubic structure. Orientation is defined by the Miller index with (100) or (111) faces being the most common for silicon. Ion implantation depths depend on the wafer’s crystal orientation, since each direction offers distinct paths for transport.


Phosphorus Doped Silicon

Phosphorus Doped Silicon



Nanoshel’s Product Categories Link:

ZnSe/ZnS QDs WATER SOLUBLE, InP ZnS QDs SURFACE MODIFIED, CdS/ZnS QDs H2O SOLUBLE, PbS QDs SURFACE MODIFIED, ARSENIDES, LANTHANIDE NANOMATERIALS, TRANSITION METAL NANOMATERIALS, SPECIALITY CHEMICALS, MAGNETIC NANOPARTICLES, CUSTOM SYENTHESIS, METALIC FOAMS, SCREEN PRINTED BIO SENSOR, LITHIUM ION BATTERY MATERIAL, ITO COATED GLASS, POLYMERS NANO MATERIAL, NANO FABRIC COATINGS, METAL FOILS, PELLETS CHIPS METAL BALLS, WAFERS & TARGETS, SPUTTERING TARGETS, SINGLE CRYSTAL SUBSTRATES, PYROLITIC GRAPHITE, PROTECTIVE EQUIPMENTS, METAL CRUCIBLES, ALUMINA CERAMIC TILES, INORGANIC COMPOUNDS