Home » Polyethylene Foam (Closed Cell, Purity: >99.9%)

METAL FOAMS (CU/NI/AL/PE)

Stock No. CAS MSDS Specification COA
NS6130-10-1230 9002-88-4 MSDS pdf Specification pdf COA pdf

Polyethylene Foam (Closed Cell, Purity: >99.9%)

Polyethylene Foam

Polyethylene Foam (Closed Cell, Purity: >99.9%)

Quality Control: Each lot of Polyethylene Foam was tested successfully.

Polyethylene Foam

Polyethylene Foam

 
Product Polyethylene Foam
Stock No NS6130-10-1230
CAS 9002-88-4 Confirm
Purity >99.9% Confirm
Density 1.2 (LB/Cubic Ft.) Confirm
Color White Confirm
Cell Count 18 (cells/inch) Confirm
25% 7 (LB/In. Sq.) Confirm
50% 12 (LB/In. Sq.) Confirm
2 hours 30 % Confirm
24 hours 24 % Confirm
Compression Creep 5 % Confirm
Water Absorption 0.06 LB/Sq. Ft. Confirm
Thermal Stability <2 % Confirm
Service Temperature -30 to 180 °F Confirm
Contains Fire Retardant Additives No Confirm
Conclusion The specifications Confirm with enterprise standard
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Assay >99.9 %

Expert Reviews

Dr. Guowei Kwong, PhD(Ho Chi Minh City University of Science, Vietnam)

Foams are materials with a large amount of interfaces- free surfaces- with the potential to show radiation resistance due to ideally unsaturable sink strength represented by free surfaces. Nanocomposites, Nanophase materials, and Nanofoams could be unusually resistant to radiation because radiation-induced point defects cannot accumulate in the presence of the high density of defects sinks provided by interfaces and surfaces in these materials.


Dr. Marco Ferro, MD PhD(University of Nordland Bodø, Norway)

Foams are dipped into molten metal, then placed in a vacuum so that the air in the foam’s pores is removed and replaced by the alloy. The foam had pore sizes of about 2mm, that can be tuned to create a stiffer or more flexible materials. During testing of its strength material showed an ability to deform when heated above 144 degrees, regain rigidity when cooled, then return to its original shape and strength when reheated.


Dr. Ms. Huian Ruan, Taungoo Technological University, Myanmar

Amorphous metal foams are highly ductile in compression, and thus offer attractive compromises in mechanical and physical properties between crystalline metallic and ceramic foams. Metal foams have properties which make them suitable for automotive industry,  in ship building, aerospace industry and civil engineering.


Polyethylene Foam

Polyethylene Foam


Note
*Exchanges of materials/products are not permitted. Nanoshel does not offer refunds.
*US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted