Silicon Germanium Wafers (Ge,Diameter: 50.8 mm, Antimony Doped)

Silicon Germanium Wafers

Product: Silicon Germanium Wafers (Ge,Diameter: 50.8 mm, Antimony Doped)

Silicon Germanium Wafers

Quality Control: Each lot of NANOSHEL Silicon Germanium Wafers was tested successfully.

Product Name Silicon Germanium Wafers
Product Code NS6130-10-1123
CAS 7440-56-4 Confirm
Diameter 50.8mm Confirm
Type N Type Confirm
Doping Antimony Confirm
Orientation <100> Confirm
Surface Both Side Polished Confirm
Wafer Thickness 500 +/- 25 µm Confirm
Resistivity 10.5 g/cm³ Confirm
Quantity 25 Wafers Confirm
Main Inspect Verifier Manager QC

 Experts Review:

Dr. Henrik Jensen,Ph.D (Middle East Technical University Ankara, Turkey)
Silicon wafers are key component in integrated circuits. Integrated circuits are, simply put a composite of various electronic components that are arranged to perform a specific function. Silicon is the principle platform for semiconductor devices.  A wafer is a thin slice of the semiconductor material, which serves as the substrate for microelectronic devices built in and over the wafer.


Dr. Chiyoko Hayashi (Osaka University Suita, Japan)
As silicon wafer’s primary use is in integrated circuits. Integrated circuits power many of devices that can be used by society everyday. Computers and smartphones are just two of the devices that are dependent on this technology. Silicon is the stable among all the semiconductors. Other uses include sensors, such as the tire pressure sensor system and solar cells. Silicon wafers absorbs the photons in sunlight and this in turn create electricity.



Dr. Joris Smits, Ph.D (Wrocław University of Technology, Poland)
The wafers serves as the substrates for microelectronic devices built in and over the wafer and undergoes many microfabrication process steps such as doping or ion implantation, etching, deposition of various materials and photolithographic pattering.



Dr. Ms. Sally Adams (National Technical University of Athens)
Silicon wafers are available in a variety of diameters from 25.4mm (1 inch) to 300mm. The diameter has gradually increased to improve throughput and reduce cost with the current  state –of-the-art of fab considered to be 300mm with the next standard projected to be 450mm.



Dr. Peter Bruggmann (Technical University of Madrid, Spain)
Wafer thickness is determined by the mechanical strength of the material used the wafer must be thick enough to support its own weight without cracking during handling. Wafers are grown from crystals having a regular crystal structure, with silicon having a diamond cubic structure. Orientation is defined by the Miller index with (100) or (111) faces being the most common for silicon. Ion implantation depths depend on the wafer’s crystal orientation, since each direction offers distinct paths for transport.


silicon germanium wafers

silicon germanium wafers



Nanoshel’s Product Categories Link:

METAL NANOPOWDERS, COMPOUND NANOPOWDERS, OXIDE NANOPOWDERS, ALLOY NANOPOWDERS, CLAY NANOPOWDERS, GRAPHENE NANOPOWDERS, METAL NANOWIRES & NANORODS, DOPED NANOPOWDERS, SINGLE WALL CNT, MULTI WALL CNT, DOUBLE WALL CNT, FUNCTIONALIZED SWCNT, FUNCTIONALIZED MWCNT, INDUSTRIAL MWCNT, CARBON NANOTUBE ARRAY, METAL NANO DISPERSIONS, OXIDE NANO DISPERSIONS, CNT GRAPHENE DISPERSION, BIO NANO CONJUGATE SERVISES, POSS, CORE SHELL NANOPARTICLES, ZnSE/ZnS QUANTUM DOTS, InP/ZnS QUANTUM DOTS, CdS/ZnS QUANTUM DOTS, CdSe/ZnS QUANTUM DOTS, UPCONVERTING NANOPARTICLES, PbS QUANTUM DOTS