Home » Silicon Nitride Metal Balls (Si3N4, Purity: 92-95%, Dia: 10 mm)


Stock No. CAS MSDS Specification COA
NS6130-10-1284 12033-89-5 MSDS pdf Specification pdf COA pdf

Silicon Nitride Ball

Silicon Nitride Ball (Si3N4, Purity: 92-95%, Dia: 10 mm)


Silicon Nitride Ball

Silicon Nitride Ball

Product Silicon Nitride Ball
Stock No. NS6130-10-1284
CAS 12033-89-5 Confirm
Purity 92-95% Confirm
Diameter 10 mm Confirm
Molecular Weight 28.085 g/mol Confirm
Density 3.20 g/cm³ Confirm
Melting Point 1414 °C Confirm
Boiling Point 3265 °C Confirm
Thermal Conductivity 35 W/mk Confirm
Max Working Temp 800 °C Confirm
Bending Strength 600-1000 Mpa Confirm
Fracture Toughness 5.0-7.0 MPam½ Confirm
Surface High Polished, Mirror Surface Confirm
Available Quantities 25Gms, 50Gms, 100Gms and larger quantities
Quality Control Each lot of Silicon Nitride Ball was tested successfully.
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Assay 92-95%

Expert Reviews

Dr. Mark Brown, (Georgia Institute of Technology in Atlanta,USA)

Metal balls are rolling, spherical elements that exhibit greater strength and toughness than plastic and ceramic balls. They have a sufficient hardness for many industrial ball applications, and most products are electrically conductive. Some steel, nickel, and cobalt balls can be magnetized. Metal balls made from certain alloys can also provide corrosion resistance and refractory resistance.

Dr. Darren Chandler, Ph.D(Manchester Metropolitan University, U.K)

Silicon Nitride Metal Balls: Other applications for metal balls include proprietary, patented or specialty applications such as drilling equipment, hardness testers, swivel balls, pinball machine balls, weights, toys, bicycle parts, foosball balls, handles, knobs, skates, drawer slides, spacers, fillers, projectiles, marine parts, door locks, and coffee makers.

Dr. Jang Huang, Ph.D (Shandong Science and Technology University, China)

Silicon Nitride Metal Balls: Metal chips are generally irregular shaped portions of metal fragments where the key to selection is the “available surface area.” Chips come in a variety of sizes and shapes which can range from being quite large (an inch or two in diameter to fractions of inches). Generally, the smaller the chips, the more surface area there is of the material being used.

Dr. Ms. Cristiana Barzetti,  (University of Cagliari-Department of Chemical Engineering and Material Science, Italy)

Silicon Nitride Metal Balls: Pellets have hollow bases (the skirt area of the pellet) that are generally larger in diameter than the front section (known as the head of the pellet). This enables the skirt to effectively seal the bore against the pressure pushing on the base of the pellet while the friction on the head area is not too high.

Dr. Baron Augustin, Ph.D (TUM)(Technical University of Munich, Germany)

Metal Balls for valve applications include products for check valves and ball valves, as well as trunnion, segment, stem, three-way, four-way, poly or multiple way, and two-piece balls. Valve balls must have a controlled sphericity and sufficient tolerances for proper sealing against the valve seat.

Silicon Nitride Ball

Silicon Nitride Ball

*Exchanges of materials/products are not permitted. Nanoshel does not offer refunds.
*US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted