Home » Steel E52100 Balls (Fe, Purity: 99.9%, Dia: 12.7 mm)

PELLETS CHIPS & METAL BALLS

Stock No. CAS MSDS Specification COA
NS6130-10-1272 12597-68-1 MSDS pdf Specification pdf COA pdf

Steel E52100 Balls (Fe, Purity: 99.9%, Dia: 12.7 mm)

Steel E52100 Balls

Steel E52100 Balls (Fe, Purity: 99.9%, Dia: 12.7 mm)

Quality Control: Each lot of Steel E52100 Balls was tested successfully.

Steel E52100 Balls

Steel E52100 Balls

 
Product Steel E52100 Balls
Stock No. NS6130-10-1272
CAS 12597-68-1 Confirm
Purity 99.9 % Confirm
Diameter 12.7mm Confirm
Density 7.80 g/cm³ Confirm
Young's Modulus 200 GPa Confirm
Grade 25 Confirm
Hardness 60-66 HRC Confirm
Tensile Strength 362-377 PSIx10³ Confirm
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Assay 99.9%

Expert Reviews

Dr. Mark Brown
Dr. Mark Brown, (Georgia Institute of Technology in Atlanta,USA)

Metal balls are rolling, spherical elements that exhibit greater strength and toughness than plastic and ceramic balls. They have a sufficient hardness for many industrial ball applications, and most products are electrically conductive. Some steel, nickel, and cobalt balls can be magnetized. Metal balls made from certain alloys can also provide corrosion resistance and refractory resistance.


Dr. Darren Chandler
Dr. Darren Chandler, Ph.D(Manchester Metropolitan University, U.K)

Steel E52100 Balls: Other applications for metal balls include proprietary, patented or specialty applications such as drilling equipment, hardness testers, swivel balls, pinball machine balls, weights, toys, bicycle parts, foosball balls, handles, knobs, skates, drawer slides, spacers, fillers, projectiles, marine parts, door locks, and coffee makers.


Dr. Jang Huang
Dr. Jang Huang, Ph.D (Shandong Science and Technology University, China)

Metal chips are generally irregular shaped portions of metal fragments where the key to selection is the “available surface area.” Chips come in a variety of sizes and shapes which can range from being quite large (an inch or two in diameter to fractions of inches). Generally, the smaller the chips, the more surface area there is of the material being used.


Dr. Ms. Cristiana Barzetti
Dr. Ms. Cristiana Barzetti,  (University of Cagliari-Department of Chemical Engineering and Material Science, Italy)

Steel E52100 Balls: Pellets have hollow bases (the skirt area of the pellet) that are generally larger in diameter than the front section (known as the head of the pellet). This enables the skirt to effectively seal the bore against the pressure pushing on the base of the pellet while the friction on the head area is not too high.


Dr. Baron Augustin
Dr. Baron Augustin, Ph.D (TUM)(Technical University of Munich, Germany)

Steel E52100 Balls: Metal Balls for valve applications include products for check valves and ball valves, as well as trunnion, segment, stem, three-way, four-way, poly or multiple way, and two-piece balls. Valve balls must have a controlled sphericity and sufficient tolerances for proper sealing against the valve seat.


Steel E52100 Balls

Steel E52100 Balls