Tantalum Nanoparticles (Ta, High Purity, 99.5%, 50-80 nm, Metal Basis)

Tantalum Nanoparticles

Product: Tantalum Nanoparticles

Quality Control: Each lot of NANOSHEL Tantalum Nanoparticles (Ta, High Purity, 99.5%, 50-80nm, Metal Basis) was tested successfully.

Ta Nanopowder

Tantalum Nanoparticles-TEM

Ta Nanoparticles

Tantalum Nanoparticles – Size Analysis

Material Tantalum Nanoparticles
Stock No. NS6130-01-145
APS 50-80nm Confirm
CAS 7440-25-7 Confirm
Purity 99.5% Confirm
Density 16.7 g/cm³ Confirm
Molecular Weight 180.9478 g/mol Confirm
Melting Point 3017 °C Confirm
Boiling Point 5458 °C Confirm
Morphology Spherical Confirm
Thermal Conductivity 57.5 W/m-K Confirm
Electrical Resistivity 131 nΩ-m @20 °C Confirm
Available Quantities 25Gms, 50Gms, 100Gms and larger quantities
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Ta >99.5
O ≥0.12
N ≤0.0044
Nb ≤0.0050
Ti ≤0.0003
W ≤0.0020
Mo ≤0.0010
Cr ≤0.0007
Mn ≤0.0003
Fe ≤0.0011
Ni ≤0.0009
Si ≤0.0024
C ≤0.0032
H ≤0.0010

 Experts Review:


Jules L. Routbort (Argonne National Laboratory, Argonne, USA)
Tantalum Nanoparticles
is a rare, shiny, gray, dense metal. It is highly ductile and can be drawn into a thin wire. Its chemical properties are very similar to those of niobium. Tantalum is highly corrosion resistant due to the formation of an oxide film. It is an excellent conductor of heat and electricity. The metal has a melting point exceeded only by tungsten and rhenium. Tantalum is one of the five major refractory metals (metals with very high resistance to heat and wear). The other refectory metals are tungsten, molybdenum, rhenium and niobium. Tantalum is considered to be non-toxic.

Dr. Ms. Kamiko Chang, Ph.D(University of Science and Technology Beijing, China)
Tantalum Nanoparticles
 is mostly used in electronics applications for capacitors and high power resistors. It is also used to make alloys to increase strength, ductility and corrosion resistance. The metal is used in dental and surgical instruments and implants, as it causes no immune response.

images (12) Dr. Nicholaos G. Demas (Newcastle University School Of Machanical & Systems Engg. UK)
Tantalum Nanoparticles: The properties of tantalum nanopowder is similar to gold nanoparticles, but are far more cost-effective, and thus, well-positioned to replace gold in regenerative medicine for labeling and tracking of cell grafts through x-ray-based imaging. However, the amount of tantalum nanoparticles that can be taken up by stem cells is not enough to make individual cells visible in x-ray images.

images Takeo Oku (Department of Materials Science, The University of Shiga Prefecture, Hassaka 2500, Hikone, Shiga 522-8533, Japan)
Tantalum Nanoparticles: 
Nanoscale tantalum powder has been widely studied for a variety of applications. For example, superfine and pliable tantalum powders were needed to improve the quality or reduce package size of capacitors. Reduction in package size allows designers to add higher-capacitance-value parts to existing circuits or to use smaller package size to further miniaturize their circuits.

kritter Dr. Ms. Guixin (Susan), Ph.D (Switzerland-Institute for Inorganic Chemistry, Zurich, Switzerland)
Tantalum Nanoparticles:
Porous tantalum also facilitates the in growth of soft tissue, including the formation of blood vessels that were found to assemble on the surface and within the structure of the porous tantalum. Also, since tantalum is strongly radiopaque due its high atomic number, this property is widely employed for marking in orthopedics and in endovascular medical devices. Another important development was the production of nanoparticles based on tantalum. These particles have been shown to be superior to iodinated contrast agents for blood pool imaging applications due to their longer circulation time.

Tantalum Nanoparticles

Tantalum Nanoparticles

free quote

Contact Us for Tantalum Nanoppowder
From us, you can easily purchase Tantalum Nanoparticles at great prices. Place online order and we will dispatch your order through DHL, FedEx, UPS. You can also request for a quote by mailing us at sales@nanoshel.com Contact: +1 302 268 6163 (US and Europe), Contact: +91-9779550077 (India). We invite you to contact us for further information about our company and our capabilities. At Nanoshel, we could be glad to be of service to you. We look forward to your suggestions and feedback.

More Metal Nanopowder By Nanoshel

NS6130-01-141 – Silicon Nanopowder Sigma (Si, >99%, <100 nm, Monocrystalline)

NS6130-01-142 – Monocrystalline Silicon Nanopowder (Si, >99%, <80 nm)

NS6130-01-143 – SILICON Nanoparticles (Si, >99%, <50 nm)

NS6130-01-144 – TIN Nanoparticles (Sn, 99.9%, 60-80nm, Metal basis)

NS6130-01-145 – Tantalum Nanopowder (Ta, High Purity, 99.5%, 50-80 nm, Metal Basis)

NS6130-01-146 – TITANIUM Nanopowder (Ti, 99.9%, <70nm, Metal basis)

NS6130-01-147 – TUNGSTEN Nanoparticles (W, 99.9%, <70 nm, Metal basis)

NS6130-01-148 – ZINC Nanopowder (Zn, High Purity, 99.9%, 60-80 nm, Metal basis)

NS6130-01-149 – ZINC Nanoparticles (Zn, High Purity, 99.9%, 30-60 nm, Metal basis)

NS6130-01-150 – STAINLESS STEEL Nanoparticles (High Purity, 99.9%, APS: 70nm)