High Purity Tin Metal Shots
Product: Tin Metal Shots (Sn, Purity: 99.9%, Size : 2-5 mm)
Quality Control: Each lot of Tin Metal Shots was tested successfully.
|Materials||Tin Metal Shots|
|Melting Point||231.93 °C||Confirm|
|Boiling Point||2602 °C||Confirm|
|Thermal Expansion||22.0 µm/(m-K) at 25 °C||Confirm|
|Thermal Conductivity||66.8 W/(m-K)||Confirm|
|Available Quantities||25Gms, 50Gms, 100Gms and larger quantities|
|Main Inspect Verifier||Manager QC|
Typical Chemical Analysis
|Sn||≥ 99.5 %|
|Pb||≤ 0.006 %|
|Bi||≤ 0.01 %|
|Sb||≤ 0.01 %|
|Fe||≤ 0.004 %|
|As||≤ 0.0005 %|
|Cu||≤ 0.0005 %|
Dr. Bruce Perrault, Ph.D (Georgia Institute of Technology (Georgia Tech), USA)
Tin Metal Shots: We procured Tin Nanoparticles from Nanoshel and are the obtained nanoparticles are well synthesized as per the requirement. I have used tin nanoparticles to enhance the performance of lithium ion battery by incorporating tin nanoparticles in the anode electrode, owing to the increase in interfacial area and decrease in lithium ion transport path length. The melting point of tin can decrease dramatically with particle size reduction to several nanometers owing to its enhanced surface area to volume ratio. The decreased melting point of tin nanosolder is highly desirable for preventing damage to electronic devices, caused by high reflow temperatures. As per my opinion these particles are worth and significant.
Dr. Myron Rubenstein, Ph.D (Polytechnic University of Turin, Italy)
Tin Metal Shots: Nanoshel is very reliable company to get required nanomaterials. As I ordered Tin nanoparticles from Nanoshel, they exhibit many properties, such as grain size, large surface areas, homogeneity and highly reactive surfaces, malleable, flexible and ductile metal because of these properties tin nanoparticles resists oxygen and water and I used these nanoparticles to coat other metals to prevent corrosion. It is also considered to be non-toxic and is therefore used for food packaging, such as tin cans.
Dr. Huojin Chan (University of Science and Technology of China, Hefei, Anhui, China)
Tin Metal Shots: The most promising candidates to displace commercialized graphite, the operating potential of metallic Sn are slightly higher than graphite, and the extrapolating potential is close to Li to improve the safety of LIBs. Also Sn can be reversibly lithiated up to the end compound Li4, 4 Sn with a theoretical reversible capacity of 994 mAh g-1, almost three times higher than the theoretical value of the conventional graphite anode. However, the practical use of Sn anodes has been hindered by the short cycle life due to a large volume expansion of Sn during lithiation-delithiation process. Almost 300% of its initial volume expansion would result in serious mechanical stress causing rapid cracking and collapse of the structure, and loose contact between the anode and the current collector, thereby drastic capacity fading.
Dr. Ms. Yi Yen Shi, (King Mongkut’s University of Technology Thonburi,Bangkok, Thailand)
Tin Metal Shots: Tin is a malleable post-transition metal that is not easily oxidized in air. It can be coated onto other metals to prevent corrosion. Tin nanoparticles (Sn) have high surface activity, large specific surface area, good dispersion performance and uniform particle size. Tin nanoparticles dispersed in lubricating oil can be used as multi-purpose oil additives, which have the potential to reduce friction and wear in automobile engines.
Dr. Hans Roelofs Ph.D (National Technical University of Athens, Greece)
Tin Metal Shots: Nanosized tin particles possess distinct properties compared with the bulk tin which have stimulated considerable interest in scientific research and technological applications. Typically, tin has a low melting point and a readiness to form alloys with other metal such as lead and bismuth. It is an important material in solder alloys. It is also used in transparent ant-static films, Anti-microbial, antibiotics and anti-fungal agents. Tin nanoparticles are mostly used in Coatings, plastics, nanofibres, bandages and textiles.
Please feel free to send us your requirement about our products
+1 646 470 4911 (US)
+36 30 4750555 (EU)
Nanoshel’s Product Categories Link:
ORGANIC COMPOUNDS, METAL ORGANIC FRAMEWORKS, FEED GRADE ACTIVE PHARMACEUTICAL INGREDIENT, ORGANIC FLUORINE MATERIALS, NEW PRODUCTS, METAL MICRO POWDER, OXIDE MICRO POWDER, COMPOUND MICRO POWDER, ALLOY MICRO POWDER, CLAY POWDER, CARBON POWDER, 3D PRINTING POWDER, ULTRA HIGH TEMPERATURE CERAMICS NANOMATERIALS, ACETATES BORATES NANOMATERIALS, CARBIDES ALUMINATES NANOMATERIALS, CHLORIDES NANOMATERIALS, FLUORIDES NANOMATERIALS, NITRATES/SULPHIDES, SILICATES/TITANATES, STIMULATES/ALUMINATES NANOMATERIALS