Home » Zinc Metal Pieces (Zn, APS: 5-15mm, Purity: 99.9%)

PELLETS CHIPS & METAL BALLS

Stock No. CAS MSDS Specification COA
NS6130-10-1062 7440-66-6 MSDS pdf Specification pdf COA pdf

Zinc Metal Pieces (Zn, APS: 5-15mm, Purity: 99.9%)

Zinc Metal Pieces

Zinc Metal Pieces (Zn, APS: 5-15mm, Purity: 99.9%)

Quality Control: Each lot of Zinc Metal Pieces was tested successfully.

 
Product Zinc Metal Pieces
Stock No. NS6130-10-1062
CAS 7440-66-6 Confirm
Purity 99.9% Confirm
APS 5-15mm Confirm
Molecular Formula Zn Confirm
Molecular Weight 65.39 g/mole Confirm
Form Solid Confirm
Color Bluish-Grey Confirm
Melting Point 419.53 °C Confirm
Boiling Point 907 °C Confirm
Density 7.14 g/cm³ Confirm
Vapor Pressure 1 mm Hg @ 487 deg C Confirm
Thermal Expansion 30.2 µm/(m•K) (at 25 °C) Confirm
Thermal Conductivity 116 W/(m•K) Confirm
Electrical Resistivity 59.0 nΩ•m (at 20 °C) Confirm
Magnetic Ordering Diamagnetic Confirm
Young's Modulus 108 GPa Confirm
Shear Modulus 43 GPa Confirm
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Assay 99.9%
Other Metal 1000ppm

Expert Reviews

Dr. Mark Brown
Dr. Mark Brown, (Georgia Institute of Technology in Atlanta,USA)

Metal balls are rolling, spherical elements that exhibit greater strength and toughness than plastic and ceramic balls. They have a sufficient hardness for many industrial ball applications, and most products are electrically conductive. Some steel, nickel, and cobalt balls can be magnetized. Metal balls made from certain alloys can also provide corrosion resistance and refractory resistance.


Dr. Darren Chandler
Dr. Darren Chandler, Ph.D(Manchester Metropolitan University, U.K)

Other applications for metal balls include proprietary, patented or specialty applications such as drilling equipment, hardness testers, swivel balls, pinball machine balls, weights, toys, bicycle parts, foosball balls, handles, knobs, skates, drawer slides, spacers, fillers, projectiles, marine parts, door locks, and coffee makers.


Dr. Jang Huang
Dr. Jang Huang, Ph.D (Shandong Science and Technology University, China)

Metal chips are generally irregular shaped portions of metal fragments where the key to selection is the “available surface area.” Chips come in a variety of sizes and shapes which can range from being quite large (an inch or two in diameter to fractions of inches). Generally, the smaller the chips, the more surface area there is of the material being used.


Dr. Ms. Cristiana Barzetti
Dr. Ms. Cristiana Barzetti,  (University of Cagliari-Department of Chemical Engineering and Material Science, Italy)

Pellets have hollow bases (the skirt area of the pellet) that are generally larger in diameter than the front section (known as the head of the pellet). This enables the skirt to effectively seal the bore against the pressure pushing on the base of the pellet while the friction on the head area is not too high.


Dr. Baron Augustin
Dr. Baron Augustin, Ph.D (TUM)(Technical University of Munich, Germany)

Metal Balls for valve applications include products for check valves and ball valves, as well as trunnion, segment, stem, three-way, four-way, poly or multiple way, and two-piece balls. Valve balls must have a controlled sphericity and sufficient tolerances for proper sealing against the valve seat.


Zinc Metal Pieces

Zinc Metal Pieces