Zinc Metal Shots (Zn, Purity: 99.9%, Size : 2-5 mm)

Highly Pure – Zinc Metal Shots

Product: Zinc Metal Shots (Zn, Purity: 99.9%, Size : 2-5 mm)

Quality Control: Each lot of NANOSHEL Zinc Metal Shots was tested successfully.

Zinc Metal Shots

Zinc Metal Shots

 

Product Name Zinc Metal Shots
Stock No. NS6130-12-000030
CAS 7440-66-6 Confirm
Size 2-5 mm Confirm
Appearance Silver-Gray Confirm
Molecular Formula Zn Confirm
Density 7.14g/cm³ Confirm
Melting Point 419.53°C Confirm
Boiling Point 907 °C Confirm
Thermal Expansion 30.2 µm/(m·K) (at 25 °C) Confirm
Thermal Conductivity 116 W/(m·K) Confirm
Crystallographic Structure Hexagonal Close-Packed (hcp) Confirm
Available Quantities 25Gms, 50Gms, 100Gms and larger quantities
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Al 0.002 %
Fe 0.001 %
Mo 0.001 %
Sb ≤ 0.001 %
S 0.005 %
Co 0.001 %
Ni 0.001 %

 Experts Review:

Miller-(Christopher)-345x239Dr. Baron Augustin, Ph.D (TUM)(Technical University of Munich, Germany)
Metal balls are rolling, spherical elements that exhibit greater strength and toughness than plastic and ceramic balls. They have a sufficient hardness for many industrial ball applications, and most products are electrically conductive. Some steel, nickel, and cobalt balls can be magnetized. Metal balls made from certain alloys can also provide corrosion resistance and refractory resistance.


images (33)

Dr. Darren Chandler, Ph.D(Manchester Metropolitan University, U.K)
Zinc Metal Shots: 
Other applications for metal balls include proprietary, patented or specialty applications such as drilling equipment, hardness testers, swivel balls, pinball machine balls, weights, toys, bicycle parts, foosball balls, handles, knobs, skates, drawer slides, spacers, fillers, projectiles, marine parts, door locks, and coffee makers.


Wiggs

Dr. Ms. Cristiana Barzetti (University of Cagliari-Department of Chemical Engineering and Material Science, Italy)
Metal chips are generally irregular shaped portions of metal fragments where the key to selection is the “available surface area.” Chips come in a variety of sizes and shapes which can range from being quite large (an inch or two in diameter to fractions of inches). Generally, the smaller the chips, the more surface area there is of the material being used.


jetsonlee

Dr. Jang Huang, Ph.D (Shandong Science and Technology University, China)
Zinc Metal Shots: 
Pellets have hollow bases (the skirt area of the pellet) that are generally larger in diameter than the front section (known as the head of the pellet). This enables the skirt to effectively seal the bore against the pressure pushing on the base of the pellet while the friction on the head area is not too high.


images (21)Dr. Mark Brown (Georgia Institute of Technology in Atlanta,USA)
Zinc Metal Shots: 
Metal Balls for valve applications include products for check valves and ball valves, as well as trunnion, segment, stem, three-way, four-way, poly or multiple way, and two-piece balls. Valve balls must have a controlled sphericity and sufficient tolerances for proper sealing against the valve seat.


Zinc Metal Shots



Nanoshel’s Product Categories Link:

ZnSe/ZnS QDs WATER SOLUBLE, InP ZnS QDs SURFACE MODIFIED, CdS/ZnS QDs H2O SOLUBLE, PbS QDs SURFACE MODIFIED, ARSENIDES, LANTHANIDE NANOMATERIALS, TRANSITION METAL NANOMATERIALS, SPECIALITY CHEMICALS, MAGNETIC NANOPARTICLES, CUSTOM SYENTHESIS, METALIC FOAMS, SCREEN PRINTED BIO SENSOR, LITHIUM ION BATTERY MATERIAL, ITO COATED GLASS, POLYMERS NANO MATERIAL, NANO FABRIC COATINGS, METAL FOILS, PELLETS CHIPS METAL BALLS, WAFERS & TARGETS, SPUTTERING TARGETS, SINGLE CRYSTAL SUBSTRATES, PYROLITIC GRAPHITE, PROTECTIVE EQUIPMENTS, METAL CRUCIBLES, ALUMINA CERAMIC TILES, INORGANIC COMPOUNDS