Home » Zirconium Sponge (Zr, Purity: 99.9%, APS: 40-50µm)

PELLETS CHIPS & METAL BALLS

Stock No. CAS MSDS Specification COA
NS6130-12-000034 7440-67-7 MSDS pdf Specification pdf COA pdf

Zirconium Sponge (Zr, Purity: 99.9%, APS: 40-50µm)

Zirconium Sponge

Zirconium Sponge (Zr, Purity: 99.9%, APS: 40-50µm)

Quality Control: Each lot of Zirconium Sponge was tested successfully.

Zirconium Sponge

Zirconium Sponge

 
Product Zirconium Sponge
Stock No. NS6130-12-000034
CAS 7440-67-7 Confirm
APS 40-50 µm Confirm
Molecular Formula Zr Confirm
Color Silvery White Metal Confirm
Melting Point 1852 °C Confirm
Boiling Point 3580 °C Confirm
Density 6.52 g/cm3 Confirm
Thermal Expansion 5.7 µm/(m·K) Confirm
Thermal Conductivity 22.6 W/(m·K) Confirm
Electrical Resistivity 69.3 nΩ-m (at 25 °C) Confirm
Crystallographic Structure Hexagonal Close-Packed (hcp) Confirm
Available Quantities 25Gms, 50Gms, 100Gms and larger quantities
Main Inspect Verifier Manager QC

Expert Reviews

Dr. Mark Brown
Dr. Mark Brown, (Georgia Institute of Technology in Atlanta,USA)

Metal balls are rolling, spherical elements that exhibit greater strength and toughness than plastic and ceramic balls. They have a sufficient hardness for many industrial ball applications, and most products are electrically conductive. Some steel, nickel, and cobalt balls can be magnetized. Metal balls made from certain alloys can also provide corrosion resistance and refractory resistance.


Dr. Darren Chandler
Dr. Darren Chandler, Ph.D(Manchester Metropolitan University, U.K)

Zirconium Sponge: Other applications for metal balls include proprietary, patented or specialty applications such as drilling equipment, hardness testers, swivel balls, pinball machine balls, weights, toys, bicycle parts, foosball balls, handles, knobs, skates, drawer slides, spacers, fillers, projectiles, marine parts, door locks, and coffee makers.


Dr. Jang Huang
Dr. Jang Huang, Ph.D (Shandong Science and Technology University, China)

Metal chips are generally irregular shaped portions of metal fragments where the key to selection is the “available surface area.” Chips come in a variety of sizes and shapes which can range from being quite large (an inch or two in diameter to fractions of inches). Generally, the smaller the chips, the more surface area there is of the material being used.


Dr. Ms. Cristiana Barzetti
Dr. Ms. Cristiana Barzetti,  (University of Cagliari-Department of Chemical Engineering and Material Science, Italy)

Zirconium Sponge: Pellets have hollow bases (the skirt area of the pellet) that are generally larger in diameter than the front section (known as the head of the pellet). This enables the skirt to effectively seal the bore against the pressure pushing on the base of the pellet while the friction on the head area is not too high.


Dr. Baron Augustin
Dr. Baron Augustin, Ph.D (TUM)(Technical University of Munich, Germany)

Zirconium Sponge: Metal Balls for valve applications include products for check valves and ball valves, as well as trunnion, segment, stem, three-way, four-way, poly or multiple way, and two-piece balls. Valve balls must have a controlled sphericity and sufficient tolerances for proper sealing against the valve seat.


Zirconium Sponge

Zirconium Sponge