Product | EVA Foam | |
Stock No | NS6130-10-1265 | |
CAS | 24937-78-8 | Confirm |
Purity | >99.9% | Confirm |
Density | 90 kg/m3 | Confirm |
Thermal Conductivity | 0.038 W/mK | Confirm |
Compressive Strength | 78 Kpa | Confirm |
Surface Hardness | 40 °C | Confirm |
Tear Strength | 0.35 N/mm m² | Confirm |
Tensile Strength | 780 Kpa | Confirm |
Elongation at break | 100 % | Confirm |
Compression deformation | 25 % | Confirm |
Size Change Rate | 0.8 % | Confirm |
Rebound Rate | 26.00 % | Confirm |
Elongation | 130 % | Confirm |
Service Temperature | -30 to 180 °F | Confirm |
Adhesive Thickness | 0.15 mm | Confirm |
Adhesive Weight | 80 g/m³ | Confirm |
Adhension | 18 N/25 mm | Confirm |
Application | +10 °C min | Confirm |
Service | -50~+100 °C | Confirm |
Short peak | +120 °C | Confirm |
Storage | 3 year | Confirm |
Conclusion | The specifications Confirm with enterprise standard | |
Quality Control | Each Lot of EVA Foam was tested successfully | |
Main Inspect Verifier | Manager QC |
Typical Chemical Analysis
Assay | >99.9% |
Foams are materials with a large amount of interfaces- free surfaces- with the potential to show radiation resistance due to ideally unsaturable sink strength represented by free surfaces. Nanocomposites, Nanophase materials, and Nanofoams could be unusually resistant to radiation because radiation-induced point defects cannot accumulate in the presence of the high density of defects sinks provided by interfaces and surfaces in these materials.
Foams are dipped into molten metal, then placed in a vacuum so that the air in the foam’s pores is removed and replaced by the alloy. The foam had pore sizes of about 2mm, that can be tuned to create a stiffer or more flexible materials. During testing of its strength material showed an ability to deform when heated above 144 degrees, regain rigidity when cooled, then return to its original shape and strength when reheated.
Amorphous metal foams are highly ductile in compression, and thus offer attractive compromises in mechanical and physical properties between crystalline metallic and ceramic foams. Metal foams have properties which make them suitable for automotive industry, in ship building, aerospace industry and civil engineering.
Nanoshel’s Product Categories Link:
EVA foam (Ethylene Vinyl Acetate and blended copolymers)