Recovered from Covid 19. We are up & running. We are accepting orders now!

Home » Milled Carbon Fiber Powder (Purity: >95%, Diameter: 6-8 µm)

METAL POWDER

Stock No. CAS MSDS Specification COA Catalogue
NS6130-05-563 99685-96-8 MSDS pdf Specification pdf COA pdf

Milled Carbon Fiber Powder

(Purity: >95%, Diameter: 6-8 µm)

Available Pack Size: 10Gms, 25Gms, 50Gms, 100Gms, 250Gms, 500Gms, 1Kg & Bulk orders
Milled Carbon Fiber Powder – SEM/TEM

Milled Carbon Fiber Powder – SEM/TEM

Milled Carbon Fiber – Size Analysis

Milled Carbon Fiber – Size Analysis

 
Product Milled Carbon Fiber Powder
Stock No NS6130-05-563
CAS 99685-96-8 Confirm
Purity >95% Confirm
Diameter 6-8µm Confirm
Length <150µm Confirm
Form Powder Confirm
Color Black Confirm
Density 1.76 g/cm³ Confirm
Thermal conductivity 5~10 W/m/K Confirm
Quality Control Each lot of Milled Carbon Fiber Powder was tested successfully.
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Assay >95%

Expert Reviews

Dr. Marcus Tägtmeyer, (International Medical and Technological University, Dar es Salaam, Tanzania)

Milled carbon fibre powder is a very short strand-length fibrous powder synthesized from recycled carbon fibre. Use of milled carbon fibre in a range of applications can significantly enhance mechanical properties such as tensile strength and modulus, dimensional stability and electrical/electrostatic conductivity. Because of the carbon fibre's incredibly low coefficient of thermal expansion (CTE), with the addition of milled carbon fibres to a range of casting, laminating and coating resins and paints will significantly increment the thermo-dimensional stability of the cured product.


Dr. Ms Jane Li, (National Penghu University of Science and Technology, Magong, Penghu, Republic of China)

Milled carbon fiber powder: The very high tensile strength and isotropic orientation of milled carbon fibers also reduce shrinkage and distortion in the cast or laminated composite materials. Milled carbon fibres can be used to thermoplastics and thermosets for the injection moulding and cold casting or vacuum casting applications respectively. This is added to thermoplastics, such as Nylon, for injection moulding applications as well as thermoset resins such as epoxy, polyurethane and polyester resin for vacuum casting or cold casting.


Dr. Willem-Jan de Kleijn Ph.D, (Luleå University of Technology, Luleå, Sweden)

Due to the carbon fibre is electrically conductive, so milled carbon fibres can be mixed into paints, resins and other materials. This is used to make them electrically conductive or anti-static. Polymers containing milled carbon fibre can be engineered for resistivity from anti-static, through static dissipative to conductive. It only depends on the fibre content.


Dr. JKF Gojukai PhD, (Kaiserslautern University of Technology, Kaiserslautern, Rhineland-Palatinate, Germany)

Milled carbon fibers are interesting because they have the ability to enhance the thermal, electrical and mechanical properties of a composite. CF is well known as a reinforcement agent because of its high strength and modulus that significantly contribute to a composite's performance. Composites containing CF are often stronger and are much lighter than steel.


Dr. Huang Fu Ph.D, (Maebashi Institute of Technology, Maebashi, Gunma, Japan)

Milled carbon fibre powder is used extensively in fibre reinforced composites for the replacement of metals in the most critical applications for instance aerospace, defence, nuclear technology, automobile, marine application, sports goods, civil construction, biomedical etc. the reinforcement of structures among others is the first area of application of carbon fibres with favoured advantages of lightweight & high strength.


Milled Carbon Fiber Powder

Milled Carbon Fiber Powder


Note
*Exchanges of materials/products are not permitted. Nanoshel does not offer refunds.
*US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted