Home » Aluminium Beads (Al, Purity: 99.9%, Size: 5-15mm)

PELLETS CHIPS & METAL BALLS

Stock No. CAS MSDS Specification COA
NS6130-12-000027 7429-90-5 Specification pdf COA pdf

Aluminium Beads (Al, Purity: 99.9%, Size: 5-15mm)

Aluminium Beads

Aluminium Beads (Al, Purity: 99.9%, Size: 5-15mm)

Quality Control: Each lot of NANOSHEL Al, Purity: 99.9%, Size: 5-15mm was tested successfully.

 
Product Name Aluminium Beads
Stock No. NS6130-12-000027
CAS 7429-90-5 Confirm
Purity 99.9% Confirm
APS 5-15mm Confirm
Molecular Formula Al Confirm
Molecular Weight 26.98 g/mol Confirm
Form Beads Confirm
Color Silvery metal Confirm
Melting Point 660.37 °C Confirm
Boiling Point 2467 °C Confirm
Density 2.7g/cm3 Confirm
Thermal Expansion (25°C) 23.1 µm·m-1·K-1 Confirm
Thermal Conductivity 237 W/m ·K Confirm
Young's Modulus 70 GPa Confirm
Poisson Ratio 0.35 Confirm
Vickers Hardness 167 MPa Confirm
Electronegativity 1.61 Paulings Confirm
Specific Heat 0.9 J/g ·K Confirm
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Assay 99.9%

Expert Reviews

Dr. Mark Brown
Dr. Mark Brown, (Georgia Institute of Technology in Atlanta,USA)

Aluminium Beads:- Sputtering is a technique used deposit thin films of a material onto a surface.there are many different ways to deposit materials such as metals, ceramics.  Aluminum Beads are made of recycled Aluminum. Aluminium beads are fine spherical.


Dr. Darren Chandler
Dr. Darren Chandler, Ph.D(Manchester Metropolitan University, U.K)

Aluminium Beads Materials have attached considerable attention because of their potential application in catalysis bioamalysis and electronic devices. Metal oxide and hydroxide colloid containing aluminium are important in the ceramics industry. Aluminum treated by surface finishing is widely used as a building material and in electron devices.


Dr. Jang Huang
Dr. Jang Huang, Ph.D (Shandong Science and Technology University, China)

Aluminium Beads are widely used in the aeronautic industry for their high mechanical properties; however, because they are very sensitive to corrosion, surface treatments are often required. TiO2 has excellent resistance to oxidation and it is often used to improve the corrosion resistance of aluminium surfaces.


Dr. Ms. Cristiana Barzetti
Dr. Ms. Cristiana Barzetti,  (University of Cagliari-Department of Chemical Engineering and Material Science, Italy)

Aluminium Beads are widely used in the aeronautic industry for their high mechanical properties; however, because they are very sensitive to corrosion, surface treatments are often required. TiO2 has excellent resistance to oxidation and it is often used to improve the corrosion resistance of aluminium surfaces.


Dr. Baron Augustin
Dr. Baron Augustin, Ph.D (TUM)(Technical University of Munich, Germany)

Aluminium Beads have been widely used in the aeronautic industry for the construction of structural components (such as fuselage panels, frames, etc.) due to their high mechanical properties, in terms of damage tolerance and tensile strength, coupled with the low weight and fabrication simplicity. On the other hand, some aluminum alloys, very sensitive to corrosion, in particular in aggressive external environments.


Aluminum Beads

Aluminum Beads