Aluminium Powder (Al, Purity: 99%, APS: 40-50µm)

Aluminium Powder

Product: Aluminium Powder (Al, Purity: 99%, APS: 40-50µm)

Quality Control: Each lot of NANOSHEL Aluminium Powder was tested successfully.

Aluminium Powder

Particles Size Analysis – Al Powder

Materials Aluminium Powder
Stock No NS6130-05-535
CAS No 7429-90-5
Purity 99%
APS 40-50µm
Appearance Black Grey Powder
Morphology Sphere
Specific Surface Area 2.77 m²/g
Bulk Density 3.99 g/cm3
Packaging 2 Layers Vacuum Packaging

TYPICAL CHEMICAL ANALYSIS

Si ≤95ppm
Fe ≤209 ppm
Mn ≤44 ppm
Ni ≤67 ppm
Cu ≤45 ppm
Pb ≤12 ppm
Mg ≤233 ppm

 Experts Review:

Dr. Marcus Tägtmeyer (International Medical and Technological University, Dar es Salaam, Tanzania)


Dr. Marcus Tägtmeyer (International Medical and Technological University, Dar es Salaam, Tanzania)
Aluminium Powder in soluble in the organic solvent non polar diethyl-ether, ethanol mineral acid. Aluminium oxide has evolved rapidly and found many high technology application. Aluminium oxide used in the fields of electronic devices, energy conversion, sensors and medicine.


Dr. Ms Jane Li (National Penghu University of Science and Technology, Magong, Penghu, Republic of China)
Dr. Ms Jane Li (National Penghu University of Science and Technology, Magong, Penghu,  Republic of China)
Aluminium Powder, The thin films of Copper aluminum oxide with p type and N type behavior use as chemical gas sensors. Copper aluminum oxide thin films with proper resistance can be successfully applied as P and N type resistive gas sensors for zone detection.


Dr. Willem-Jan de Kleijn Ph.D (Luleå University of Technology, Luleå, Sweden)
Dr. Willem-Jan de Kleijn Ph.D (Luleå University of Technology, Luleå, Sweden)
Aluminium Powder,   with   a   high   enthalpy   of   combustion,   is   commonly   used   in   rocket   propellant   formulations.  However, aluminum oxide  may  rapidly  form   when   aluminum   surfaces   are   exposed   in   air,   especially   superfine   aluminum   particles. Due  to  their  chemical  and  thermal  durability,  silica  coatings are of interest for protection of materials against oxidation, such as iron, carbon fibers and Co.


Dr. JKF Gojukai PhD (Kaiserslautern University of Technology, Kaiserslautern, Rhineland-Palatinate, Germany)
Dr. JKF Gojukai PhD (Kaiserslautern University of Technology, Kaiserslautern, Rhineland-Palatinate, Germany)
Aluminium Powder
-based, particulate-reinforced metal matrix composites (AMMCs) have been the most popular among the composite materials due to their low density and isotropic properties in addition to the superior mechanical, thermal and electrical properties. AMMCs have a more inhomogeneous structure than alloys due to presence of reinforcing particles. Such an inhomogeneous structure can enhance the pitting corrosion susceptibility, as well as cause a preferential dissolution of the interface between the matrix and the reinforcing particles.


Dr. Huang Fu Ph.D (Maebashi Institute of Technology, Maebashi, Gunma, Japan)
Dr. Huang Fu Ph.D (Maebashi Institute of Technology, Maebashi, Gunma, Japan)
Aluminium Powder Core-shell particles have been attracted much interest due to their fantastic properties, different from those of single-component materials, and their synthesis has opened new directions for material research. Coating the particles with a thin shell of a compatible material makes it possible to control the core particles. The structure, size, and composition of core particles can be altered in a controllable way to tailor their magnetic, optical, mechanical, thermal, electrical, and catalytic properties.


Aluminium Powder

Aluminium Micro Powder



Nanoshel’s Product Categories Link:

ZnSe/ZnS QDs WATER SOLUBLE,InP ZnS QDs SURFACE MODIFIED,CdS/ZnS QDs H2O SOLUBLE,PbS QDs SURFACE MODIFIED,ARSENIDES,LANTHANIDE NANOMATERIALS,TRANSITION METAL NANOMATERIALS,SPECIALITY CHEMICALS,MAGNETIC NANOPARTICLES,CUSTOM SYENTHESIS,METALIC FOAMS,SCREEN PRINTED BIO SENSOR,LITHIUM ION BATTERY MATERIAL,ITO COATED GLASS,POLYMERS NANO MATERIAL,NANOFABRIC COATINGS,METAL FOILS,PELLETS CHIPS METAL BALLS,WAFERS & TARGETS,SPUTTERING TARGETS,SINGLE CRYSTAL SUBSTRATES,PYROLITIC GRAPHITE,PROTECTIVE EQUIPMENTS,METAL CRUCIBLES,ALUMINA CERAMIC TILES,INORGANIC COMPOUNDS