Home » Amine Functionalized Nanotubes (>95wt% OD:20-30nm Length:15-30µm NH2:2-3Wt%)

FUNCTIONALIZED MWCNT

Stock No. CAS MSDS Specification COA
NS6130-06-674 308068-56-6 Specification pdf

Amine Functionalized Nanotubes (>95wt% OD:20-30nm Length:15-30µm NH2:2-3Wt%)

Amine Functionalized Nanotubes High Purity

Product: Amine Functionalized Nanotubes (>95wt% OD:20-30nm Length:15-30µm NH2:2-3Wt%)

Quality Control: Each lot of Amine Functionalized Nanotubes was tested successfully.

FTIR Spectra of Amine Functionalized Nanotubes

FTIR Spectra of Amine Functionalized Nanotubes

XPS Amine Functionalized Nanotubes

XPS Amine Functionalized Nanotubes

 
Product Amine Functionalized Nanotubes
Stock No NS6130-06-674
CAS 308068-56-6 Confirm
Diameter 20-30nm Confirm
Length 15-30μm Confirm
Purity >99.99% (Ultra High Purity MWNT) Confirm
Amorphous Carbon <3% Confirm
Residue (calcination in air) <2% Confirm
NH2 Content % 2-3Wt% Confirm
Average interlayer distance 0.34nm Confirm
Special Surface Area 90-350* m²/g Confirm
Bulk density 0.05-0.17 g/cm³ Confirm
Real density 1-2 g/cm³ Confirm
Charging* 2180 (Capacity: mA h/g) Confirm
Discharging* 534 (Capacity: mA h/g) Confirm
Volume Resistivity 0.1-0.15 Ω.cm ( measured at pressure in powder) Confirm
Available Quantities 10Gms, 25Gms, 50Gms, 100Gms and larger quantites
Main Inspect Verifier Manager QC

Expert Reviews

Dr. Ms. Kelley Johnson, Ph.D, (Adam Mickiewicz University in Poznań, Poland)

The solubilization and chemical modification of carbon nanotubes represent an emerging area in the research on nanotubes-based materials. These reactions may roughly be divided into two categories: a direct attachment of functional groups to the graphitic surface and the use of the nanotube-bound carboxylic acids.


Dr. Richard Harper, Ph.D, (National Polytechnic Institute (IPN), Mexico)

For the solubilization of carbon nanotubes, the attachment of relatively large functional groups to the nanotubes is required. For the functionalization of multi wall carbon nanotubes and their solubility in common organic solvents &/or water the amidation of nanotube-bound carboxylic acids with long-chain alkylamines (octadecylamine, for example), a variety of oligomeric and polymeric compounds have been used.


Dr. Juan Yang, (Seoul National University Seoul, South Korea)

The functionalization breaks the nanotube bundles, which is essential to the solubility. For various polymer functionalized carbon nanotubes, there is direct microscopy evidence for the wrapping of individual nanotubes by the polymers. The solubility of the functionalized carbon nanotubes is sometimes strongly dependent on the reaction routes.


Dr. Steve Chesney, Ph.D, (Ludwig Maximilian University of Munich, Germany)

The functionalized carbon nanotubes in solution can be deposited directly onto a surface for various microscopy analyses. The solubility also offers unique opportunities in the development of carbon nanotubes-based materials and in the use of the solubilized carbon nanotubes as starting materials for further chemical and biochemical modifications.


Dr. Ms. Mia Liao, (National Taipei University of Technology, Taiwan)

The solubility of the carbon nanotubes associated with the functionalization and chemical modification offers excellent opportunities not only in the characterization and understanding of carbon nanotubes but also in the utilization of carbon nanotubes for various nanomaterials. Parameters such as structure, surface area, surface charge, size distribution, surface chemistry, and agglomeration state as well as purity of the samples have considerable impact on the reactivity of carbon nanotubes.


Amine Functionalized Nanotubes

Amine Functionalized Nanotubes


Note
*Exchanges of materials/products are not permitted. Nanoshel does not offer refunds.
*US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted