Cerium III Bromide Powder (CeBr3, Purity: 99.9%, APS: 40-50 µm)

Cerium III Bromide Powder

Product: Cerium III Bromide Powder  (CeBr3, Purity: 99.9%, APS: 40-50 µm)

Quality Control: Each lot of Cerium III Bromide Powder was tested successfully.

Materials Cerium III Bromide Powder
Stock No. NS6130-12-000377
CAS 14457-87-5 Confirm
APS 40-50 µm Confirm
Purity 99.9% Confirm
Molecular Formula CeBr3 Confirm
Density 5.1 g/cm³ Confirm
Molecular Weight 379.82 g/mol Confirm
Melting Point 722 °C Confirm
Boiling Point 1457 °C Confirm
Crystallographic Structure Hexagonal Confirm
Available Quantities 25Gms, 50Gms, 100Gms and larger quantities
Main Inspect Verifier Manager QC (Cerium III Bromide Powder)

Chemical Analysis of Cerium III Bromide Powder

Assay ≥ 99.5 %
Br ≤ 31.86 %
Ce ≤ 67.93 %
Fe ≤ 0.033 %
Mg ≤ 0.00012 %
Si ≤ 0.0012 %
Ca ≤ 0.0072 %
Cu ≤ 0.00050 %
Cr ≤ 0.00020 %
Mn ≤ 0.00040 %
C ≤ 0.051 %

Experts Review:

58496396Dr. Bruce Perrault, Ph.D (Georgia Institute of Technology (Georgia Tech), USA)
In recent years, much attention has been paid to the synthesis and study of nanoparticles because of wide range of potential applications. Particularly, magnetic nanoparticles can have the special characteristic of exhibiting single-domain magnetism and can be used in magnetic tapes, ferrofluid, magnetic refrigerants, etc, because of their ultra fine size dimensioned with magnetic domain size. Cerium(iii) Bromide Powder nanoparticles are non-toxic materials and due to enhanced magnetic properties can be more effective as compare with magnetite nanoparticles for biomedical application.


1252525Dr. Myron Rubenstein, Ph.D (Polytechnic University of Turin, Italy)
The particles that are used in the pharmaceutical industry are still micron size only because the nano powders in the pharmaceutical industry are still in the research stage for most of the cases but in some cases of laparoscopy and angioscopy nano powders have been used but it are not cost effective. In the recent years the demand for nano powders are increased drastically because of its wide range of applications by producing Cerium(iii) Bromide Powder with metals like aluminum, iron and copper. This Novel technology is used in the production of aluminum powder which has applications in aviation industry.


2536582Dr. Huojin Chan (University of Science and Technology of China, Hefei, Anhui, China)
Cerium III Bromide Powder Production of Cerium(iii) Bromide Powder had been developed by gas phase synthesis through the pyrolysis of organometallic precursors. We adjust this method as the method for industrial synthesis of commercially available nanopowder of mean size of 6-100 nm. This method runs without vacuum and gives a relative high productivity of laboratory equipment.


10604509_1459864657612760_2405225879143508610_oDr. Ms. Yi Yen Shi, (King Mongkut’s University of Technology Thonburi,Bangkok, Thailand)
Cerium III Bromide Powder have wide range of applications and different methods are available for production. In the paper the three methods discussed are mainly used in pharmaceutical industries and electronic industries for the production of nano powder. If we compare the two processes (PGSS) and (DELOS) Process there is difference between the shapes of the powder in (PGSS) Powder is spherical and in (DELOS) there are cylindrical and dendrite.


125448Dr. Hans Roelofs Ph.D (National Technical University of Athens, Greece)
Cerium III Bromide Powder has many applications in different fields. Ceramics used in nano sized powders are more ductile at elevated temperatures compared to coarse grained ceramics and can be sintered at low temperatures. Nano sized powders of iron and copper have hardness about 4-6 times higher than the bulk materials because bulk materials have dislocations. Nano sized copper and silver are used in conducting ink and polymers. In Magnetic mono domains which increases the coercively compared to large particles these increases the storage capacities of the hard disks in the computers without increasing the physical dimensions.


Cerium III Bromide Powder

Cerium III Bromide Powder

free quote

Contact Us for CeBr3 Powder
From us, you can easily purchase Cerium III Bromide Powder at great prices. Place online order and we will dispatch your order through DHL, FedEx, UPS. You can also request for a quote by mailing us at sales@nanoshel.com Contact: +1 302 268 6163 (US and Europe), Contact: +91-9779550077 (India). We invite you to contact us for further information about our company and our capabilities. At Nanoshel, we could be glad to be of service to you. We look forward to your suggestions and feedback.


More Cerium Products By Nanoshel

30-10-1140 – Cerium Sputtering Target (Ce, Purity: 99.9%)

NS6130-05-546 – Cerium Oxide Glass Polishing Powder (CeO2, Purity: >99.9%, APS: 60-70µm)

NS6130-05-545 – Cerium Oxide Powder (CeO2, Purity: >99.9%, APS: 1-20µm)

NS6130-01-182 – CERIUM Nanoparticles (Ce, APS: <60nm, Purity: >99%)

NS6130-04-407 – Cerium Oxide Dispersion (CeO2, Purity, 99.99%, APS: 30-50nm)

NS6130-12-000377 – CeBr3 (Cerium Bromide, Purity: 99.9%, APS: 40-50 µm)

NS6130-04-406 – Cerium Oxide Nanoparticle Dispersion (CeO2, Purity: 99.99%, APS: 30nm)

NS6130-03-306 – Cerium Oxide Nanoparticles (CeO2, High purity, 99.5%, 80nm)