Iron Sulfide Powder
Product Iron Sulfide Powder (FeS, Purity: >99.99%, APS: 30-45 µm)
Quality Control: Each lot of Iron Sulfide Powder was tested successfully.
|Materials||Iron Sulfide Powder|
|Melting Point||1,194 °C||Confirm|
|Molar mass||87.910 g/mol||Confirm|
|Solubility in Water||Insoluble||Confirm|
|Solubility||React In Acid||Confirm|
|Available Quantities||25Gms, 50Gms, 100Gms and larger quantities|
|Main Inspect Verifier||Manager QC|
Typical Chemical Analysis
|SiO2||≤ 5 %|
|Pb||≤ 0.1 %|
|Zn||≤ 0.1 %|
|Cu||≤ 0.1 %|
|C||≤ 0.28 %|
|H2O||≤ 0.7 %|
Dr. Bruce Perrault, Ph.D (Georgia Institute of Technology (Georgia Tech), USA)
During electric melting, residual sulphur level decreases due to cleaner melting practices and the use of low sulphur steel scrap. It is found that iron does not readily respond to inoculants if Sulphur is below 0.04%. Then it is necessary to resulphurize by using Iron Sulfide Powder to hold the level in 0.05% to 0.12% range.
Dr. Myron Rubenstein, Ph.D (Polytechnic University of Turin, Italy)
Iron Sulfide Powder (also spelled sulphate) is a constituent of garden and lawn moss killers and some fertilisers. It is exactly the same chemical compound regardless of how it is sold or used. They may vary slightly in concentration and be mixed with other compounds but apart from that they are the same. This is either straight ferrous sulphate or perhaps with a little fertiliser added.
Dr. Huojin Chan (University of Science and Technology of China, Hefei, Anhui, China)
Iron Sulfide Powder as a fertiliser is the same stuff but sold for different purposes usually for greening grass and hardening against frost and disease. The concentration to achieve this is usually lower than if used as a moss killer but pretty much every knowledgeable gardener and green keeper knows that it will do the same job as a moss killer at its higher permitted application rates. Because it is not sold as a moss killer it is not required to be certified as a pesticide.
Dr. Ms. Yi Yen Shi, (King Mongkut’s University of Technology Thonburi,Bangkok, Thailand)
Application for Iron Sulfide Powder is used to treat iron-deficiency, It is an oral iron salt, It is used to increase levels of iron and red-blood cells in the body, In general this drug is used to treat or prevent iron-deficient anaemia (low levels of red blood cells due to lack of iron), Benefits of being on this drug can include increases in iron and red-blood cells in the body, The prevention or treatment of iron deficiency anaemia.
Dr. Hans Roelofs Ph.D (National Technical University of Athens, Greece)
Iron Sulfide Powder constitute a diverse group of solid and dissolved complexes many of which play key role in marine system. The group is particularly complex in the lowest temp environments much of the earth surface a number of matestable phases become is biogeochemical processes. Iron sulfide are intrinsic & essential part of the global biogeochemical sulfides cycle.
Contact Us for Iron Sulfide Powder
From us, you can easily purchase Manganese Sulphide Nanoparticles at great prices. Place online order and we will dispatch your order through DHL, FedEx, UPS. You can also request for a quote by mailing us at email@example.com Contact: +1 302 268 6163 (US and Europe), Contact: +91-9779550077 (India). We invite you to contact us for further information about our company and our capabilities. At Nanoshel, we could be glad to be of service to you. We look forward to your suggestions and feedback.
More Nitrates/Sulphides Products By Nanoshel
NS6130-12-000052 – IRON POWDER (Fe, Purity: 99.9%, APS: <50µm)
NS6130-12-000146 – VANADIUM (III) SULFATE (V2(SO4)3, Purity: 99.9%)
NS6130-12-000161 – CADMIUM SULFIDE POWDER (CdS, Purity: 99.9%)
NS6130-12-000165 – Tungsten Sulfide Powder (WS2, Purity: 99.9%,APS: 5-10µm)
NS6130-12-000249 – MANGANESE SULPHIDE NANOPOWDER (MnS, Purity: 99.9%)
NS6130-12-000250 – COBALT SULPHIDE NANOPOWDER (CoxSy, Purity: 99.9%)
NS6130-12-000251 – TIN (II) SULPHIDE NANOPOWDER (SnS, Purity: 99.9%)
NS6130-12-000258 – ZINC NITRATE HEXAHYDRATE (Zn (NO3)2 6H2O, Purity: 99.9%, APS: 80-100 nm)
NS6130-12-000267 – POTASSIUM SULFATE NANOPOWDER (K2SO4, Purity: 99.9%)
NS6130-12-000270 – MAGNESIUM NITRATE (Mg(NO3)2, Purity: 99.9%)
NS6130-12-000272 – TIN NITRATE (Sn (NO3)4, Purity: 99.9%)
NS6130-12-000295 – MOLYBDENUM DISULFIDE (MoS2, Purity: 99.9%)
NS6130-12-000336 – BARIUM SULPHATE NANOPOWDER (BaSO4, Purity: 99.9%)
NS6130-12-000409 – Iron Sulfide Powder (FeS, Purity: >99.99%, APS: 30-45 µm)