Niobium Doped Titanium Dioxide Dispersion (Nb/TiO2, IPA, 99.9%, 3-6nm)

Niobium Doped Titanium Dioxide Dispersion

Product: Niobium Doped Titanium Dioxide Dispersion  (Nb/TiO2, IPA,  99.9%, 3-6nm)

Quality Control: Each lot of NANOSHEL Niobium Doped Titanium Dioxide Dispersion was tested successfully.

Product Name Niobium Doped Titanium Dioxide Dispersion
Stock No. NS6130-04-491
CAS 13463-67-7 Confirm
APS 3-6 nm Confirm
Form Dispersion Confirm
Molecular Formula Nb/TiO2 Confirm
Doping Niobium(Nb) Doped Confirm
Solvent IPA/Ethanol Confirm
Content 3-5 wt% Confirm
pH 7.5±1.5 Confirm
Density 1.7 g/mL±0.1 g/mL at 25 °C Confirm
Boiling Point < 120 °C Confirm
Available Quantities 10ml, 50ml, 100ml, 250ml and larger quantities
Main Inspect Verifier Manager QC

Experts Review:

Dr. Alan Crawford Ph.D (National Metallurgical Academy of Ukraine, Dnipropetrovsk, Ukraine)Dr. Alan Crawford Ph.D (National Metallurgical Academy of Ukraine, Dnipropetrovsk, Ukraine)
A wide usage of metal oxide nanoparticles and nano structured materials attracts many people to research for their controlled synthesis via new method. Because, special properties of metallic or metal oxide nanoparticles exhibited several potential application in electronics, optoelectronics, catalysis and thin film coatings. In particular, alumina nanoparticles are expected to play important roles in a variety of relevant applications, and hence, the field has generated important contributions regarding the synthesis and processing of such particles.


Dr. Alte Schule Rheingau PhD. (Limerick Institute of Technology, Limerick, Ireland)Dr. Alte Schule Rheingau PhD. (Limerick Institute of Technology, Limerick, Ireland)
Metal oxide in a dispersed form is used in a number of formulations which contain Water. Such formulations include sun screening preparations, cosmetics and veterinary products. The preparation of these formulations is greatly eased if the metal oxide is available in the form of an aqueous dispersion which can be readily incorporated into the formulation. However, stable dispersions of oxides are difficult to prepare and the Zinc oxide may dissolve at low or high pH values.


Dr. Bunroeun Thong, Professor (Phnom Penh Institute of Technology,Phnom Penh, Cambodia)Dr. Bunroeun Thong, Professor (Phnom Penh Institute of Technology,Phnom Penh, Cambodia)
Oxide dispersion is non-toxic and chemical properties are stable. It almost has no reaction with other material produce under normal temperature. It is a partial acid oxide. It has no reaction with oxygen, hydrogen sulfide, sulfur dioxide, carbon dioxide and ammonia and is not soluble in water, fatty acids, other organic acid and weak inorganic acid except for alkali and hot nitric acid. But, in some specific conditions, titanium dioxide can get reaction with some substance.


Dr. Ms. Karel Gorissen (Costa Rica Institute of Technology, Alajuela, Limon)Dr. Ms. Karel Gorissen (Costa Rica Institute of Technology, Alajuela, Limon)
Nanodispersion are composites consisting of solid nanoparticles with sizes varying generally from 1 to 100 nm dispersed in heat transfer liquids such as water, ethylene glycol, propylene glycol and so on. In the last decade, nanofluids have gained significant attention due to their enhanced thermal properties. A great deal of energy is expended heating industrial and residential buildings in the cold regions of the world.


Dr. Ralph Bressler(University of Southern Queensland, Australia)Dr. Ralph Bressler(University of Southern Queensland, Australia)
A stable colloidal dispersion is expected to remain without sedimentation even after prolonged periods of storage. The settling behavior of dispersions depends mainly on the size and density of the dispersed particles. Dispersion of nanopowders into liquids is a challenging task. The high surface area and surface energy which are responsible for the beneficial effects of Nanomaterials cause agglomeration of particles which leads to poor quality dispersions.


Niobium Doped Titanium Dioxide Dispersion

Niobium Doped Titanium Dioxide Dispersion



Nanoshel’s Product Categories Link:

ORGANIC COMPOUNDS, METAL ORGANIC FRAMEWORKS, FEED GRADE ACTIVE PHARMACEUTICAL INGREDIENT, ORGANIC FLUORINE MATERIALS, NEW PRODUCTS, METAL MICRO POWDER, OXIDE MICRO POWDER, COMPOUND MICRO POWDER, ALLOY MICRO POWDER, CLAY POWDER, CARBON POWDER, 3D PRINTING POWDER, ULTRA HIGH TEMPERATURE CERAMICS NANOMATERIALS, ACETATES BORATES NANOMATERIALS, CARBIDES ALUMINATES NANOMATERIALS, CHLORIDES NANOMATERIALS, FLUORIDES NANOMATERIALS, NITRATES/SULPHIDES, SILICATES/TITANATES, STIMULATES/ALUMINATES NANOMATERIALS