Home » Potassium Hexafluorophosphate (F6KP, Purity: 99.9%, APS: <100nm)
Product | Potassium hexafluorophosphate | |
Stock No | NS6130-12-000016 | |
CAS | 17084-13-8 | Confirm |
Purity | 99.9% | Confirm |
APS | <100 nm | Confirm |
HS Code | 28269000 | Confirm |
Molecular Formula | KPF6 | Confirm |
Molecular Weight | 184.0625 g/mol | Confirm |
Form | Powder | Confirm |
Color | White /Colorless | Confirm |
Density | 2.75 g/cm³ | Confirm |
Melting Point | 575 °C | Confirm |
Solubility | Soluble in water | |
Quality Control | Each lot of Potassium hexafluorophosphate was tested successfully. | |
Main Inspect Verifier | Manager QC |
Assay | 99.9% |
Potassium Hexafluorophosphate particles that are used in the pharmaceutical industry are still micron size only because the nano powders in the pharmaceutical industry are still in the research stage for most of the cases but in some cases of laparoscopy and angioscopy nano powders have been used but it are not cost effective. In the recent years the demand for nano powders are increased drastically because of its wide range of applications by producing Nano powder with metals like aluminum, iron and copper. This Novel technology is used in the production of aluminum powder which has applications in aviation industry.
Potassium Hexafluorophosphate wide range of anodic overpotentials at the mercury—aqueous interface in potassium hexafluorophosphate and sodium perchlorate supporting electrolytes in order to explore the possible dependence of the electrochemical transfer coefficient on the electrode potential. The differences in the oxidation rates in KPF6 and NaClO4 electrolytes were found to be in reasonable with the predictions. Substantial decreases in the anodic transfer coefficients for all three reactions were obtained with increasing anodic overpotential both before and after application of Frumkin double-layer corrections, in contrast to the linear Tafel plots observed at cathodic overpotentials.
Potassium Hexafluorophosphate Aqueous interface in Potassium Hexafluorophosphate is a water insoluble Potassium source for use in oxygen-sensitive applications, such as metal production. In extremely low concentrations (ppm), fluoride compounds are used in health applications.and sodium perchlorate supporting electrolytes in order to explore the possible dependence of the electrochemical transfer coefficient on the electrode potential. Potassium Hexafluorophosphate is a water insoluble Potassium source for use in oxygen-sensitive applications, such as metal production. In extremely low concentrations (ppm), fluoride compounds are used in health applications.Potassium hexafluorophosphate is the chemical compound with the formula KPF6. This colourless salt consists of potassium cations and hexafluorophosphate anions.
Potassium Hexafluorophosphate is a water insoluble Potassium source for use in oxygen-sensitive applications, such as metal production.The differences in the oxidation rates in KPF6 and NaClO4 electrolytes were found to be in reasonable with the predictions of the Frumkin model. Substantial decreases in the anodic transfer coefficients for all three reactions were obtained with increasing anodic overpotential both before and after application of Frumkin double-layer corrections, in contrast to the linear Tafel plots observed at cathodic overpotentials.
Note *Exchanges of materials/products are not permitted. Nanoshel does not offer refunds. *US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted
Dr. Bruce Perrault, Ph.D, (Georgia Institute of Technology (Georgia Tech), USA)
Potassium Hexafluorophosphate is a water insoluble Potassium source for use in oxygen-sensitive applications, such as metal production. In extremely low concentrations (ppm), fluoride compounds are used in health applications. Capacity and electrocapillary measurements were made for mercury in aqueous KPF6 solutions at 25°C. The anion is specifically adsorbed but the charge on the specifically adsorbed layer is always less than equivalent to the charge on the electrode. Over most of the range studied it is almost independent of the concentration of the ion in the bulk. this behaviour is probably due to the large size of the ion causing an increase in the thickness of the inner part of the double layer.